9600 Set top box. Altech UEC PVR9600

INSTALLATION & CONNECTION OF THE PVR 9600

Carefully remove set top box from the packaging. Insert the supplied batteries into the remote control paying attention to the +/- indicators. Connection options are listed below, it is important to ensure that all connections are secure before connecting the set top box and power pack to the mains.

Direct to TV connection

HDMI Inputs

Option 1

Option 2

AV Inputs

Option 1: HDMI Connection (High Definition TV)

• Connect the terrestrial antenna to the Antenna IN on the set top box.

• Connect a HDMI cable to the HDMI connector on the set top box and then connect the other end

of the cable to the HDMI input on the TV.

Option 2: AV Connection (Standard Definition TV)

• Connect the terrestrial antenna to the Antenna IN on the set top box.

• Connect the Audio / Video (AV) cables to the Audio (Red and White) and Video (Yellow) outputs

on the set top box and the other end to the audio and video (AV) inputs on the TV.

For assistance: [email protected]

www.uec.com.au

Page 8 of 52

Connection via Amplifier/Home Theatre System

HDMI Inputs

AV Inputs

Option 1

Option 2 & 3

Option 2

Optical Inputs

HDMI Inputs

AV Inputs

Option 1

HDMI out

Option 3

For assistance: [email protected]

www.uec.com.au

Page 9 of 52

Amplifier/Home Theatre System with HDMI inputs/output and a High Definition TV)

Option 1: Digital audio connection via HDMI

• Connect the terrestrial antenna to the Antenna IN on the set top box.

• Connect a HDMI cable to the HDMI connector on the set top box and then connect the other end

of the cable to the HDMI input connector of the Amplifier/Home Theatre system. Then connect another

HDMI cable to the output HDMI of the Amplifiier/Home Theatre System and connect the other end

to the HDMI input on the TV.

Option 2: Digital audio connection via optical cable

• Connect the terrestrial antenna to the Antenna IN on the set top box.

• Connect the optical cable to the OPTICAL connector on the set top box and then connect the other

end of the cable to the OPTICAL input of the Amplifier / Home Theatre system.

• Connect a HDMI cable to the HDMI connector on the set top box and then connect the other end

of the cable to the HDMI connector on the TV.

Option 3: AV connection

• Connect the terrestrial antenna to the Antenna IN on the set top box.

• Connect the audio cables (RED and WHITE) to the AUDIO connectors on the set top box and then connect

the other end of the cable to the AUDIO inputs (RED and WHITE) of the Amplifier /HomeTheatre System.

• Connect a HDMI cable to the HDMI connector on the set top box and then connect the other end

of the cable to the HDMI connector on the TV.

IMPORTANT: There are other possible connections available depending on your amplifier/home theatre system’s available inputs and outputs. Please consult your amplifier’s/home theatre system’s user manual for more information.

For assistance: [email protected]

www.uec.com.au

Page 10 of 52