1. Safety Precautions. Mitsubishi PKA-RP-KAL

Contents

1. Safety Precautions ................................................................2

2. Parts Names ..........................................................................2

3. Screen Configuration .............................................................5

4. Setting the Day of the Week and Time ..................................5

6. Timer .....................................................................................8

7. Other Functions ...................................................................11

8. Function Selection ...............................................................12

9. Emergency Operation for Wireless Remote-controller ........16

10. Care and Cleaning ..............................................................16

11. Troubleshooting ...................................................................17

12. Specifications ......................................................................18

Note

Fig. 1

This symbol mark is for EU countries only.

This symbol mark is according to the directive 2002/96/EC Article 10 Information for users and Annex IV, and/or to the directive 2006/66/EC Article 20 Information for end-users and Annex II.

Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality materials and components which can be recycled and/or reused. This symbol means that electrical and electronic equipment, batteries and accumulators, at their end-oflife, should be disposed of separately from your household waste. If a chemical symbol is printed beneath the symbol (Fig. 1), this chemical symbol means that the battery or accumulator contains a heavy metal at a certain concentration.

This will be indicated as follows: Hg: mercury (0,0005%), Cd: cadmium (0,002%), Pb: lead (0,004%)

In the European Union there are separate collection systems for used electrical and electronic products, batteries and accumulators.

Please, dispose of this equipment, batteries and accumulators correctly at your local community waste collection/recycling centre.

Please, help us to conserve the environment we live in!

1. Safety Precautions

Before installing the unit, make sure you read all the

“Safety Precautions”.

The “Safety Precautions” provide very important points regarding safety. Make sure you follow them.

Please report to or take consent by the supply authority before connection to the system.

Symbols used in the text

Warning:

Describes precautions that should be observed to prevent danger of injury or death to the user.

Caution:

Describes precautions that should be observed to prevent damage to the unit.

Symbols used in the illustrations

: Indicates a part which must be grounded.

Warning:

• For appliances not accessible to the general public.

• The unit must not be installed by the user. Ask the dealer or an authorized company to install the unit. If the unit is installed improperly, water leakage, electric shock or fire may result.

• Do not stand on, or place any items on the unit.

• Do not splash water over the unit and do not touch the unit with wet hands. An electric shock may result.

• Do not spray combustible gas close to the unit. Fire may result.

• Do not place a gas heater or any other open-flame appliance where it will be exposed to the air discharged from the unit.

Incomplete combustion may result.

• Do not remove the front panel or the fan guard from the outdoor unit when it is running.

• When you notice exceptionally abnormal noise or vibration, stop operation, turn off the power switch, and contact your dealer.

• Never insert fingers, sticks etc. into the air inlets or outlets.

• If you detect odd smells, stop using the unit, turn off the power switch and consult your dealer. Otherwise, a breakdown, electric shock or fire may result.

• This air conditioner is NOT intended for use by children or infirm persons without supervision.

• Young children must be supervised to ensure that they do not play with the air conditioner.

• If the refrigeration gas blows out or leaks, stop the operation of the air conditioner, thoroughly ventilate the room, and contact your dealer.

Disposing of the unit

When you need to dispose of the unit, consult your dealer.

Caution:

• Do not use any sharp object to push the buttons, as this may damage the remote controller.

• Never block or cover the indoor or outdoor unit’s air inlets or outlets.

2. Parts Names

Indoor Unit

Fan speed

Vane

Louver

Filter

Filter cleaning indication

PKA-RP·KAL

3 speeds (with auto)

Auto swing

Manual

Normal

100 hr

PKA-RP·KAL

Air inlet

Filter

Front grille

Air outlet

Louver

Vane

Emergency operation switch

2

2. Parts Names

Wired Remote-Controller

Display Section

For purposes of this explanation, all parts of the display are shown as lit. During actual operation, only the relevant items will be displayed.

Identifies the current operation

Shows the operation mode, etc.

* Multi language display is supported.

“Centrally Controlled” indicator

Indicates that operation of the remote controller has been prohibited by a master controller.

“Timer is Off” indicator

Indicates that the timer is off.

Temperature Setting

Shows the target temperature.

“Sensor” indicator

Displayed when the remote controller sensor is used.

Day-of-Week

Shows the current day of the week.

Time/Timer Display

Shows the current time, unless the simple or Auto Off timer is set.

If the simple or Auto Off timer is set, shows the time remaining.

“Locking function” indicator

Indicates that remote controller buttons have been locked.

“Clean the filter” indicator

Comes on when it is time to clean the filter.

°F°C

TIME SUN MON TUE WED THU FRI SAT

TIMER

AFTER

Hr

AFTER

ON

OFF

ERROR CODE

°F°C

ONLY1Hr.

Airflow up/down direction indicator

The indicator shows the direction of the outcoming airflow.

“One Hour Only” indicator

Displayed if the airflow is set to Low and downward during COOL or DRY operation mode. (Operation varies according to model.)

The indicator goes off after one hour when the airflow up/down direction also changes.

FUNCTION

FILTER

WEEKLY

SIMPLE

AUTO OFF

Louver display

Indicates the action of the swing louver.

Does not appear if the louver is stationary.

(Power On indicator)

Indicates that the power is on.

Timer indicators

The indicator comes on if the corresponding timer is set.

Fan Speed indicator

Shows the selected fan speed.

Room Temperature display

Shows the room temperature. The room temperature display range is 8–39 °C.

The display blinks if the temperature is less than 8 °C or 39 °C or more.

Ventilation indicator

Appears when the unit is running in

Ventilation mode.

Operation Section

Temperature set buttons

Down

Up

Timer Menu button

(Timer monitor/Timer set button)

Operation mode button

(Back button)

ON/OFF button

Fan Speed button

TEMP.

MENU

BACK MONITOR/SET

PAR-21MAA

ON/OFF

DAY

CLOCK

ON/OFF

Filter button

(<Enter> button)

Test Run button

Check button

(Clear button)

Set Time buttons

Back

Ahead

Timer On/Off button

(Set Day button)

Opening the door.

OPERATION

FILTER

CHECK TEST

CLEAR

Built-in temperature sensor

Airflow up/down button

Louver button

( Operation button) operation number.

Ventilation button

( Operation button)

To next operation number.

Note:

“PLEASE WAIT” message

This message is displayed for approximately 3 minutes when power is supplied to the indoor unit.

“NOT AVAILABLE” message

This message is displayed if a button is pressed to operate a function that the indoor unit does not have.

If a single remote controller is used to simultaneously operate multiple indoor units that are different models, this message will not be displayed if any of the indoor units is equipped with the function.

3

2. Parts Names

Wireless Remote-Controller

Transmission area

Remote controller display

* For explanation purposes, all of the items that appear in the display are shown.

* All items are displayed when the Reset button is pressed.

ON/OFF button

Temperature set buttons

Fan Speed button (Changes fan speed)

Airflow button (Changes airflow up/down direction)

Mode button (Changes operation mode)

Check button

Test Run button

Transmission indicator

Timer indicator

Operation areas

Timer Off button

Timer On button

Hour button

Minute button

Set Time button (Sets the time)

Louver button (Changes left/right direction)

Reset button

When using the wireless remote controller, point it towards the receiver on the indoor unit.

If the remote controller is operated within approximately two minutes after power is supplied to the indoor unit, the indoor unit may beep twice as the unit is performing the initial automatic check.

The indoor unit beeps to confirm that the signal transmitted from the remote controller has been received. Signals can be received up to approximately 7 meters in a direct line from the indoor unit in an area 45° to the left and right of the unit. However, illumination such as fluorescent lights and strong light can affect the ability of the indoor unit to receive signals.

If the operation lamp near the receiver on the indoor unit is flashing, the unit needs to be inspected. Consult your dealer for service.

Handle the remote controller carefully! Do not drop the remote controller or subject it to strong shocks. In addition, do not get the remote controller wet or leave it in a location with high humidity.

To avoid misplacing the remote controller, install the holder included with the remote controller on a wall and be sure to always place the remote controller in the holder after use.

Battery installation/replacement

1. Remove the top cover, insert two AAA batteries, and then install the top cover.

1

Top cover

2

3

Two AAA batteries

Insert the negative

(–) end of each battery first. Install the batteries in the correct directions (+, –)!

2. Press the Reset button.

Outdoor unit

Power

Ref. Pipes

Indoor-Outdoor

Connection wire

Earth

Press the Reset button with an object that has a narrow end.

Service Panel

4