16. Intelligent Motor Overview. Draper SC1


Add to my manuals
120 Pages

advertisement

16.  Intelligent Motor Overview. Draper SC1 | Manualzz

Intelligent (ILT) Motor Overview

The Intelligent Motor is designed to offer the sophisticated, diverse control of a window shade. The motor contains a controller inside of it. This means that there are two wires exiting the motor head. One wire is for power. It is a high voltage wire which will supply power to the motor at all times. The other wire is low voltage. This wire will connect to control and operate the motor.

High voltage wire can be hard wired into power or one can attach a 3 prong and plug it into an outlet.

The low voltage wire can connect to multiple items for operation. Some items are:

ILT Wall Switch, 121171- This switch must be used for setting limits. Limits are not factory set and must be done on site with this item. It can also be used to control the motor.

ILT Wall Switch

121171

4-Jack Modular Interface, C156.096- This item has 4 modular jacks for plugging in any combination of inputs such as ILT switches and motors. This device also has a dry contact interface for operating Intelligent Motors with dry contacts. All motors connect to the interface will operate as a group.

4-Jack Modular Interface,

C156.096

RF Receiver, C156.095- This receiver plugs onto the low voltage lead or into a 4-jack interface. You use RF transmitters (page 7) to run the motors.

RF Receiver, C156.095

IR Receiver and Transmitter, single channel, 121169- The eye plugs into a 4-jack interface for IR control.

IR Receiver and Transmitter, single channel—

121169

RS 485 Control Tap – C156.111; and Power Tap – C156.112 -

The RS 485 tap allows one to connect Intelligent Motors together on a network to run shades from an IP interface.

A variety of other controls can control the Intelligent Motor when it is on an RS 485 network. Sun sensors, smart switches are just a couple. If you are planning to work Intelligent

Motors from a RS 485 network please review these documents and contact Draper, Inc.

®

RS 485 Control Tap, C156.111, and

Power Tap, C156.112

Page 73 of 120

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement

Table of contents