advertisement
Installation and Setup
The PetSafe ® Outdoor Bark Control should be placed facing the dog and within range of the dog. The unit is designed with provisions for hanging or mounting and should be positioned at a height of no more than 1.5 metres. The Outdoor Bark Control can also stand alone. It can be placed in a tree, hanging from a pole, on a fence post, etc. For best results, the area between the Outdoor Bark Control and the dog should be free of any large obstacles.
__________________________________________________________
To Insert and Remove the Battery
1. The PetSafe Outdoor Bark Control utilizes a replaceable 9-volt battery (not included).
The battery door is located on the back of the unit. Lift the battery door open.
2. Insert the 9-volt battery with the positive side oriented as shown.
3. Replace the battery door by positioning the top edge, and snap the bottom of battery door into place.
Replace
Battery Door
Top End First
Lift Battery Door
www.petsafe.net 5
advertisement
Related manuals
advertisement
Table of contents
- 3 Components
- 3 Features
- 4 Outdoor Bark Control Works
- 4 Key Defi nitions
- 5 Installation and Setup
- 5 To Insert and Remove the Battery
- 6 Modes of Operation
- 6 What to Expect During Use of the Outdoor Bark Control
- 7 Regular Maintenance
- 7 To Test the Outdoor Bark Control
- 7 Accessories
- 8 Frequently Asked Questions
- 8 Troubleshooting
- 9 Terms of Use and Limitation of Liability
- 10 Battery Disposal
- 10 Product Warranty
- 11 Français
- 20 Nederlands
- 29 Español
- 38 Italiano
- 47 Deutsch