Chain Calculations in RPN Mode. HP 12C Platinum Financial Calculator, 12c

234 Appendix A: RPN and the Stack

The LAST X Register and the Key

The number in the displayed X-register is copied into the LAST X register whenever any of the following function keys is pressed:

+ q

-

>

§

¿ z r y

B

T

R

D

Ñ e

Ò

_ b

¡

^

à

Q

Z

Pressing gF lifts the stack (unless \, O, _ or ^ was the last key pressed, as described on page 230), then copies the number from the LAST X register into the displayed X-register. The number remains also in the LAST X register.

Chain Calculations in RPN Mode

The automatic stack lift and stack drop make it possible to do chain calculations without the necessity for keying in parentheses or storing intermediate results, as are required on some other calculators. An intermediate result in the displayed

X-register is automatically copied into the Y-register when a number is keyed in after a function key is pressed.

* Therefore, when a two-number function key is then pressed, that function is performed using the number keyed into the displayed

X-register and the intermediate result in the Y-register. The number then in the

Y-register, if remaining as an intermediate result from an earlier calculation, can then be used with the intermediate result in the X-register for another calculation.

The diagram on page 229 illustrates how the automatic stack lift and stack drop make chain calculations quick and error-free.

* Except for \, O, _, ^. For more information, refer to Stack Lift, page 230.

File name: hp 12c pt_user's guide_English_HDPMF123E27 Page: 234 of 275

Printed Date: 2005/8/1 Dimension: 14.8 cm x 21 cm