- Computers & electronics
- Computer components
- System components
- Motherboards
- ASROCK
- 970 Pro3 R2.0
- User manual
advertisement
3.8 Exit Screen
Save Changes and Exit
When you select this option, it will pop-out the following message, “Save configuration changes and exit setup?” Select [OK] to save the changes and exit the UEFI SETUP UTILITY.
Discard Changes and Exit
When you select this option, it will pop-out the following message, “Discard changes and exit setup?” Select [OK] to exit the UEFI SETUP UTILITY without saving any changes.
Discard Changes
When you select this option, it will pop-out the following message, “Discard changes?” Select [OK] to discard all changes.
Load UEFI Defaults
Load UEFI default values for all the setup questions. F9 key can be used for this operation.
62
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 5 1. Introduction
- 5 1.1 Package Contents
- 6 1.2 Specifications
- 10 1.3 Unique Features
- 15 1.4 Motherboard Layout
- 17 2. Installation
- 17 Pre-installation Precautions
- 18 2.1 CPU Installation
- 18 2.2 Installation of CPU Fan and Heatsink
- 19 2.3 Installation of Memory Modules (DIMM)
- 21 2.4 Expansion Slots (PCI and PCI Express Slots)
- 22 Operation Guide
- 25 2.6 Surround Display Information
- 26 2.7 ASRock Smart Remote Installation Guide
- 28 2.8 Jumpers Setup
- 29 2.9 Onboard Headers and Connectors
- 34 2.10 Serial ATA3 (SATA3) Hard Disks Installation
- 34 2.11 Hot Plug and Hot Swap Functions for SATA3 HDDs
- 37 2.13 Driver Installation Guide
- 37 64-bit / XP / XP 64-bit With RAID Functions
- 37 Functions
- 38 64-bit With RAID Functions
- 39 64-bit / XP / XP 64-bit Without RAID Functions
- 39 Functions
- 40 64-bit Without RAID Functions
- 40 2.16 Untied Overclocking Technology
- 41 3. UEFI SETUP UTILITY
- 41 3.1 Introduction
- 41 3.1.1 UEFI Menu Bar
- 42 3.1.2 Navigation Keys
- 43 3.2 Main Screen
- 44 3.3 OC Tweaker Screen
- 48 3.4 Advanced Screen
- 49 3.4.1 CPU Configuration
- 50 3.4.2 North Bridge Configuration
- 51 3.4.3 South Bridge Configuration
- 52 3.4.4 Storage Configuration
- 53 3.4.5 Super IO Configuration
- 54 3.4.6 ACPI Configuration
- 56 3.4.7 USB Configuration
- 57 3.4.8 Network Configuration
- 58 3.5 Hardware Health Event Monitoring Screen
- 59 3.6 Boot Screen
- 61 3.7 Security Screen
- 62 3.8 Exit Screen
- 63 4. Software Support
- 63 4.1 Install Operating System
- 63 4.2 Support CD Information
- 63 4.2.1 Running Support CD
- 63 4.2.2 Drivers Menu
- 63 4.2.3 Utilities Menu
- 63 4.2.4 Contact Information