Troubleshooting. NOXON FUN

54

6. Troubleshooting

The device does not switch on. Check it the power adaptor is connected

properly.

No sound. 1. Turn on the sound as it may be muted

2.

No network connection can be established. 1. Check the WLAN function.

2. Try to set an IP address at the device.

3. Activate the DHCP function on the rou ter and make the connection again at the

device.

that

4. A firewall is activated on the network – set the respective program in such a way possible.

5. Reboot the unit to try.

WLAN connection cannot be established. 1. Check the availability of WLAN network

on point.

2. Place the device closer to the router.

3. Make sure the WEP/WPA password is

correct.

No station is found. 1. Check the network as well as the ac cess point and firewall.

2. The station may not be available cur rently, try it again later or Select another

station.

3. The link of the station is changed or the station no longer transmits – ask the provi

der

4. The link of manual added station is not correct, make sure it is correct and re-eter.

Hiss in FM mode.

2.

Alarm does not work.

1. Check/move the FM antenna.

1. Switch on the alarm.

2. Due to the volume setting, refer to the

solutions

re

System freezes suddenly.

“No

3. The source of alarm was set to be stati on but there is no network connection.

Change the source of alarm or reconfigu connection.

The radio is overloaded, reboot the unit.

55