FEATURES. ADJ Versadeck

MAIN FEATURES

• Plays Mp3/WAV* filles from either USB Stick or SD/SDHC Card via USB Card Reader

• ID3 Track Recognition

• Auto cue

• 1/75th second frame search

• Real time cue (“Cue on the Fly”)

• Jog Wheel Pitch Bend +/-100%

• Headphone Jack w/ Volume Control

• 4 Programmable Cue (Bank) Buttons

• 8 different speed scan (4 Forward/4 Reverse)

• Pitch display

• RCA Stereo outputs

• Large bright VFD display can be viewed from wide angles.

• Folder Search for Mp3's

• Seamless Loop (uninterrupted loop playback)

• Sampler (Forward & Reverse Sampling)

• 10 Second Digital Anti-Shock

(b)

• Selectable Single or Continuous Play

• Adjustable Pitch Percentages: +/-6%, +/-10%, or +/-16%

• Instant Start within 10ms (sound is produced immediately when the PLAY button is pressed)

* WAV Files: 1411Kbps PCM

• Real Time Scratch Play

• Skid Effect

• Filter Effect

• Echo Effect

• Flanger Effect

• System Lock

• Music Master tempo

• Fader “Q” Start Control (a)

• Cue Mixing

• 3 Band EQ per channel

• Front & Rear Access Mic Jack

• Master & Booth Outputs

• 2 Phono & 2 Line Level Inputs

• Balanced XLR Outputs

(a) FADER “Q” START CONTROL: Set up your VERSADECK as described in the set-up section of this manual. After set up is completed load your players. By moving the mixer’s crossfader from left to right you can start and pause each players playback functions. For Example, when using the VERSADECK player, if your mixer’s crossfader is all the way to the left (player one is playing, player two is in cue or pause mode), and you move the fader at least 20% to the right, player two (2) will begin to play. When the crossfader is to the right, and you move it 20% to the left, player one (1) will begin to play. You can create great effects similar to scratching with this feature. After storing cue points on each side of the player, different songs may quickly be recalled by moving the mixer crossfader back and forth. New cue points can be easily selected on the VERSADECK player (see setting cue points page 22). “Q”

Start control is easy to use and mastering this feature will help you create amazing effects with your music.

(b) RELAY (FLIP-FLOP): Connect your VERSADECK player as described in the set-up section of this manual. This feature will start the next player once one (1) player has ended. For example, if player one (1) is playing a track and it ends, player two (2) will instantly begin to play. You may set RELAY to play track to track or folder to folder. For more information on this feature, see RELAY (FLIP-FLOP™) on page 33.

© American Audio ® - www.AmericanAudio.us - VERSADECK Instruction Manual Page 7