Restoring Factory Default Settings. Esoteric D-07

Restoring Factory Default Settings

OUT ( Analog output terminal)

Sets the output terminal for analog audio output.

RCA

Analog audio outputs from the RCA terminals only.

XLR2

Analog audio outputs from the XLR terminal only and is Pin 2 HOT.

XLR3

Analog audio outputs from the XLR terminal only and is Pin 3 HOT.

BOTH

There is output from both RCA and XLR terminals. XLR output is Pin

2 HOT.

Memorized settings are stored even after the power cord has been disconnected.

If you have made changes through the setup menu process, and want to restart from a known set of options, restore the unit to the default factory settings as follows:

1 Turn the unit off.

Wait for more than 30 seconds.

2 Press the POWER button while holding down the MENU button.

Release the MENU button when the unit turns on and the display lights. All memories are now erased and the unit returns to the factory settings.

DIMMER (Display dimming)

The display on the unit can be dimmed to suit the environment in which you listen to music.

3

Full brightness

2

Medium brightness

1

Minimum brightness

OFF

The display and indicators are off.

< When “OFF” is selected, pressing a button such as VOLUME turns the display back on temporarily.

< The DIMMER button on an optional P-05 remote control can also be used.

11