PROGRAM TIMER OPERATION. Fujitsu Air Conditioner, 9319356051

PROGRAM TIMER OPERATION

● The program timer allows you to integrate OFF timer and ON timer operations in a single sequence. The sequence can involve 1 transition from OFF timer to ON timer, or from ON timer to OFF timer, within a 24 hour period.

● Before using the timer function, be sure that the Remote Controller is set to the correct current time.

To use the PROGRAM Timer

1

Press the TIMER SETTING button .

At the beginning, “ ” will be fl ashing, so press the SELECT button

“ ”.

to select “

Press the NEXT button .

” within

2

Press the SELECT button to set the desired ON time.

Press the NEXT button .

3

Press the SELECT button to set the desired OFF time.

4

Press the SEND button .

Flashing the “ ”・“

To Stop Air Conditioner Operation while the Timer is Operating

Press the START/STOP button .

”.

In the case of the ON timer, the air conditioner will stop running.

If you want to cancel the setting midway, please press the TIMER

SETTING button instead of pressing the SEND button .

To cancel the PROGRAM timer

1

Press the ON/OFF button while “ ” is displayed.

2

” will disappear from the display.

● Press the ON/OFF button while “ ” is not displayed to set the ON (OFF) TIMER again for the time you set last time.

● Only run operation once with the OFF TIMER and ON TIMER combined.

(Either OFF → ON or ON → OFF once)

● Out of OFF TIMER and ON TIMER, the timer which has the nearest set time to the present will run fi rst. You can display the sequence of operation by using the arrows on the display part of the remote control (“ ” or “ ”).

● You cannot combine WEEKLY TIMER, ON/OFF TIMER (PROGRAM TIMER), and SLEEP TIMER.

● The PROGRAM TIMER cannot be set for times more than 24 hours in advance.

En-14