How to Assemble Your Mixer. GE 840104500, 106602

840104500 ENv00 8/12/02 1:47 PM Page 4

How to Assemble the Mixer

To Attach the Bowl

1.

Make sure that the Setting Control is set to RESET/OFF and the Mixer is unplugged.

2.

Press the Mixer Release Button and tilt the Mixer Head up.

3.

Place Bowl on turntable and turn clockwise until Bowl locks into place.

4.

Plug Mixer into electrical outlet.

To Remove:

1.

Make sure that the Setting Control is set to RESET/OFF and the Mixer is unplugged.

2.

Press the Mixer Release Button and tilt the Mixer Head up.

3. Turn Bowl counterclockwise to unlock.

To Attach the Beater, Wire Whisk, or Dough Hook

w

WARNING

Injury Hazard

• Unplug mixer before inserting or removing beaters.

• Unplug mixer before cleaning. Failure to do so can result in broken bones or cuts.

1.

Make sure that the Setting Control is set to RESET/OFF and the Mixer is unplugged.

2.

Press the Mixer Release Button and tilt the Mixer Head up.

3.

Insert Attachment onto Beater Shaft and press upward as far as possible.

4.

Turn the Attachment to the right, hooking beater over pin on shaft.

5.

Plug Mixer into electrical outlet.

4