advertisement
▼
Scroll to page 2
of 12
Identifying the SR2122-2 Version Level
Identifying the SR2122-2 Version Level
You can determine the SR2122-2 software version level by typing the following command at the
SR2122-2 CLI prompt:
[SR2122-2]# sho version
The resulting display lists the software version level:
Hewlett-Packard SR2122 Storage Router
CLI Version: 2.1
iSCSI Version: 0/2 (Min/Max)
System Bootstrap: 3.4.5b-K9
Operating System: 3.4.5b-K9
Application: 3.4.5b-K9
Web Server: R6_1_0
OpenSSH: 3.4p1
OpenSSL: 0.9.6e
Zlib: 1.1.4
Copyright (c) 1994-2003 Hewlett-Packard Company
[SR2122-2]#
SR2122-2 IP Storage Router Release Notes 5
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
Download
PDF
advertisement
Table of contents
- 1 SR2122-2 IP Storage Router
- 3 About this document
- 3 Release notes information
- 3 Intended audience
- 3 Other SR2122-2 IP Storage Router documentation
- 4 Overview
- 5 Identifying the SR2122-2 Version Level
- 6 Identifying the HP-UX iSCSI Software Initiator version
- 6 Identifying the HP Windows iSCSI driver version level
- 6 Figure 1: iSCSI Driver Version
- 7 Identifying the Linux Red Hat iSCSI driver version level
- 7 SR2122-2 software and iSCSI driver updates
- 8 Hardware and software support
- 8 Network interface controller (NIC) hardware support
- 8 Operating system software support
- 8 Compaq Network Teaming software support
- 8 SR2122-2 management software support
- 9 SR2122-2 configuration rules
- 9 SR2122-2 router rules
- 9 Table 1: SR2122-2 Router Rules
- 9 iSCSI host rules
- 9 Table 2: ISCSI Host Rules
- 9 Operation system rules
- 10 Storage array rules
- 10 Fibre Channel switch/fabric rules
- 10 Management software rules
- 10 Updates/Fixes for this release of firmware
- 11 Known problems
- 11 C-series MDS v2.01b switch firmware requirements
- 11 ISL loss can result when the SR2122-2 is configured as FCIP and used to extend B-series switches upgraded to firmware 3.2.x or 4.4.x
- 11 RA/MA8000, ESA/EMA12000 LUNs are initially passed to the SR2122-2 with the offset included in the LUN numbering.
- 12 Ports FC1 and FC2 are set to Loop Preferred by default
- 12 iSCSI CRC support