advertisement
5 Appendix
5.1 Technical Specifications
Physical Dimensions
EM316-2SFP User Guide
25 mm x 75 mm x 175 mm deep (1" x 3" x 7" deep)
Weight
Power
360 grams (9.6 ounces)
5V DC at 2A maximum
Storage Temperature -40° C to 70° C (-40° F to 158° F)
Operating Temperature 0° C to 50° C (32° F to 122° F)
Air Flow Clearance 1 inch (25 millimeters) clearance from external chassis vents
Relative Humidity 85% maximum, non-condensing
Regulatory Compliance
5.2 Supported Data Rates
FCC - PART 15, SUBPART B, 1999, CLASS A; CE MARK - EN 50081-
1:1992;EN 50082:1997; EN 55024:1998; EN 55022:1998; AS/NZS
3548:1995
• 100 Mbps Ethernet
• SONET/SDH
• OC-3/ STM-1 (155 Mbps)
• OC-12/STM-4 (622 Mbps)
• OC-48/STM-16 (2.5 Gbps)
• OC-48/STM-16 with FEC (2.67 Gbps)
• Fibre Channel 1 Gbps and 2 Gbps (FC-100 and FC-200)
5.3 Firmware Download
The EM316-2SFP does not include firmware upgradeable in the field.
P/N 1259003-001 Rev C3 Appendix-43
advertisement
Related manuals
advertisement
Table of contents
- 10 2 Product Overview
- 10 2.1 Management features
- 10 2.1.1 LIN
- 11 2.1.2 Loopback
- 12 3 Preparation and Installation
- 12 3.1 Unpacking the Fiber Driver Module
- 13 3.2 Front Panel Description
- 13 3.2.1 LED Display Information
- 14 3.3 DIP Switch Configuration
- 15 3.4 Module Installation
- 17 3.5 Small Form Pluggables (SFP): Handling and Installation
- 17 3.5.1 Cleaning Fibers
- 17 3.5.1.1 Cleaning Supplies
- 17 3.5.1.2 Cleaning Procedure
- 18 3.5.2 Working with SFPs
- 18 3.5.2.1 Cleaning SFPs
- 19 3.5.2.2 Mylar Tab SFP Modules
- 20 3.5.2.3 Actuator/Button SFP Modules
- 20 3.5.2.4 Inserting an Actuator/Button SFP Module
- 21 3.5.2.5 Bale Clasp SFP Module
- 22 4 Module Management
- 23 4.1 Remote Command Line Interface (CLI) Setup
- 23 4.2 Serial Command Line Interface (CLI) Setup
- 23 4.2.1 EM316NM Serial Console Setup
- 23 4.2.2 EM316LNXNM-OT Serial Console Setup
- 24 4.3 EM316NM[-5] Command Line Interface (CLI)
- 27 4.4 EM316LNXNM-OT Command Line Interface (CLI)
- 28 4.4.1 EM316LNXNM-OT Boot and CLI Login
- 29 4.4.2 CLI Navigation
- 30 4.4.3 Login Context Commands and Examples
- 30 4.4.3.1 “show version
- 30 4.4.3.2 “show log
- 31 4.4.3.3 “show running-config
- 32 4.4.3.4 “show startup-config
- 33 4.4.4 Configuring System Parameters
- 34 4.4.5 Chassis Context
- 34 4.4.5.1 Chassis Context – “show
- 35 4.4.5.2 Displaying and Saving System Parameters
- 36 4.4.5.3 Restoring Default Parameters
- 37 4.4.5.4 Chassis Context – Other Commands
- 38 4.4.6 Slot Context Commands and Examples
- 39 4.4.6.1 “?
- 40 4.4.6.2 “list
- 41 4.4.6.3 “show
- 43 4.4.6.4 “show digital-diagnostics
- 44 4.4.7 Port Context Commands and Examples
- 44 4.4.7.1 “?
- 46 4.4.7.2 “list
- 47 4.4.7.3 “show
- 48 4.4.7.4 Port Description
- 49 4.4.7.5 “show defaults
- 49 4.4.7.6 “show config
- 50 4.4.7.7 Loopback
- 50 4.4.7.8 LIN
- 51 4.4.7.9 Shutdown
- 52 5 Appendix
- 52 5.1 Technical Specifications
- 52 5.2 Supported Data Rates
- 52 5.3 Firmware Download
- 53 5.4 Troubleshooting