<b>INTRODUCTION </b>. Nortec MH SERIES


Add to my manuals
40 Pages

advertisement

<b>INTRODUCTION </b>. Nortec MH SERIES | Manualzz

1. INTRODUCTION

1.1 NOTES ON THE OPERATING INSTRUCTIONS

Limitation

These operating instructions are an addendum to the installation and operating instructions for the Nortec MH and describe the operating of the MH control unit, which is used with the models Nortec MHTC Flow, MHB Reflow, MHTC Reflow. These operating instructions are meant for well trained personnel being sufficiently qualified.

Safekeeping

Please safeguard these operating instructions in a safe place, where they can be immediately accessed. If the equipment changes hands, the documentation must be passed on to the new operator.

If the documentation gets lost, please contact your local Nortec representative.

Copyright protection

The present operating instructions are protected under the Copyright Act. Passing-on and reproduction of the manual (or part thereof) as well as exploitation and communication of the contents are prohibited without written permission by the manufacturer. Violation of copyright terms is subject to legal prosecution and arises liability for indemnification. The manufacturer reserves the right to fully exploit commercial patent rights.

1.2 SAFETY

Every person operating the MH control unit must have read and understood the operating instructions of the MH control unit as well as the installation and operating instructions of the Nortec MH (specially the safety instructions).

Knowing and understanding the contents of the operating instructions of the MH control unit and the installation and operating instructions of the Nortec MH is a basic requirement for protecting the personnel against any kind of danger, to prevent faulty operation, and to operate the unit safely and correctly.

10-00

Page 2

2008-12-03

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals