Front Panel. Philips DVD615AT98, DVD615, DVD615AT, DVD615AT99, DVD615/781

POWER ON/OFF

Press to turn the Player on or off.

The button is depressed when the Player is On (also known as Standby or lowpower mode); the : will appear on the display panel.

The button is released when the power is completely off

(the display panel will be dark or empty, with no :).

To use the POWER y button on the remote control to turn the Player on, the

POWER ON/OFF button on the front of the Player must be depressed (the : will show on the display panel).

Front Panel 17

Disc Tray

Insert a Disc here. Load the

Disc with the label facing up.

Details are on page 15.

Display

Current Disc information appears here, including elapsed playing time, current Track number, or active feature (LOAD while the Player is reading a Disc, NEXT when you move to the next Chapter, RPT ALL when playing a Disc repeatedly, LOCKED if Parental Controls is active, etc.).

The display will be dark and empty if VFD DIM is OFF. Details are on page 40.

Remote Sensor

Point the Player’s remote control here when using the remote to operate the Player.

OPEN/CLOSE A button

Press to open or close the Disc tray. You also can open or close the disc tray by pressing and holding the Number 1 button on the remote control for three seconds.

STOP

7

To use the Resume feature, press STOP

7 stop Disc playback. Play will resume from the same point the next time you start playback (if you do not turn off the Player or open the disc tray).

Or, press STOP

7 will resume from the beginning of the Disc the next time you start playback.

You must stop playback by pressing STOP

7 twice in order to access PREFERENCES in the Player’s Setup menu.

PLAY/PAUSE

3 8 button

Press to start playing a Disc. Press once during playback to pause play; press again to resume play from the same point.