５-１ Histories of additional features. Sony NSR-1100, NSR-1200, NSR-1050H, NSR-1000

NSR-1000 Series v1.1.1 Release Note

５

Appendix

５-１ Histories of additional features

５-１-１ Additional features by V1.1.0

５-１-１-１ Expansion of supported cameras

Newly supports the Sony IP network cameras and camera servers shown below.

IP network camera:

SNC-RS44, SNC-RS46, SNC-RS84, SNC-RS86, SNC-RH124, SNC-RH164

Camera server:

SNT-EP104, SNT-EP154, SNT-EX101, SNT-EX104, SNT-EX154

Major new feature supported by the NSR-1000 series are as follows:

・ H.264 Support

・ Camera Tampering Detection

・ Shadow Tour

・ Visibility Enhancer

・ XDNR

For the further information about restrictions or precautions with regard to the network cameras /camera servers, see later in this document.

In addition, IQinVision cameras shown below are newly supported.

IQeye510, IQeye703, IQeye705, IQeye711, IQeye752, IQeye753, IQeye755

For details of other supported cameras, refer to １ -４”Support Camera Information”.

５-１-１-２ System Controller RM-NS1000 support

Newly supports the Sony System Controller RM-NS1000. For details, refer to the

Quick Setup/Start Guide and User’s Guide which come with the product.

５-１-１-３ iSCSI storage support

Newly supports the iSCSI RAID as external storage for the NSR-1000 series. For the further information of installation, connection, etc., refer to the technical document which will be separately available and Installation Manual /User’s Guide which come with the product.

- 32 -

NSR-1000 Series v1.1.1 Release Note

５-１-１-４ 4CIF resolution support

Newly supports 4CIF resolution (PAL: 704x576, NTSC: 704x480) for the Sony IP network cameras.

Supported model name and firmware version are as follows:

Camera Model Name

SNC-RX530

SNC-RX550

Camera Firmware Version

3.10/2.40 or higher

3.10/2.40 or higher

SNC-RX570

SNC-CS50

SNC-RZ50

SNC-DF50

SNC-DF80

SNC-DF85

3.10/2.40 or higher

2.30 or higher

2.40 or higher

1.20 or higher

1.20 or higher

1.20 or higher (*1)

*1 When you want to select the image size of more than 4CIF on SNC-DF85, the firmware version of the camera should be V1.02 or higher. If the former version, do not select 4CIF in the image size setting.

５-１-１-５ Highlight function

Newly supports the highlight function that displays flashing red frames around images in the custom layout at the occurrence of related alarm/event. For details, refer to the User’s Guide.

５-１-１-６ Auto-logon function

Newly supports the auto-logon function that allows you to be logged on without being certificated by the NSR-1000 series at start-up. For details, refer to the User’s Guide.

５-１-１-７ ONVIF support

Newly supports ONVIF Version 1.01.

・ Auto Registration and Multiple Camera Registration are not supported.

Please specify a Device Type "ONVIF".

・ Only supports JPEG streaming.

・ It is not guaranteed to connect to all ONVIF V1.01 conformant products.

- 33 -

NSR-1000 Series v1.1.1 Release Note

Object

５-１-２ Additional features by V1.0.4

Improvement

Server/Client AXIS and IQinVision cameras are supported. (VT1:2072, 2099)

Client Audio Upload From a Client is supported. (VT2:728)

Server/Client Specifying Camera and Server with Host Name is enabled. (VT1:2095,

VT3:863)

Server/Client All Monitor Frames Function on the Monitor Control pane is enabled.

(VT1:2083, VT2:736)

Server/Client [Close] button in the right-bottom on each configuration screen is added.(VT1:2104, VT3:871)

Server/Client Disabling audio recording function during audio monitoring is added.

(VT1:2094, VT2:870)

Server/Client Tool Hint function on the GUI is supported.(VT1:2109, VT3:866)

Client The [Resume time on inactivity] setting is enabled on the Camera tour configuration screen.(VT2:855)

Server/Client The E-flip(Recorder) function for all cameras is supported. (VT1:2061,

VT3:850)

Server/Client Event information is added in the e-mail from action. (VT1:2087, VT3:934)

Server/Client The Installer of the Media File Player is able to be exported.

Object

５-１-３ Additional features by V1.0.1

Improvement

Server

Server

Server

The preparation time for play back in case of having a lot of records is shorter than previous software release. (VT1:1864)

Audio quality from NSR-1000 Series is enhanced. (VT1:1951)

Monitoring display at 1920x1200 resolution is enlarged. (VT1:1578)

Server/Client How to choose searched records to export is more intuitive. (VT1:1966)

Server/Client ‘Resume time on inactivity’ on the camera tour configuration menu can be selected for restart camera tour. (VT1:1276)

- 34 -

NSR-1000 Series v1.1.1 Release Note

Server/Client The NSR-1000 Series and the client software start to support controlling

PTZ of analog camera via VISCA protocol. (VT1:1911)

- 35 -