advertisement
22 Preference Settings time. Make sure that your local time is displayed right on the
Local Time parameter.
To set the local time yourself, set the Mode option to Manual and enter your local time to the Local Time parameter with the numeral buttons.
The time format is day/month/year 24-hour:minute.
3.4
Parental control
In general a television program is labeled a classification according to the level of violence, nudity and language of its content. When you are watching a program, you can check its program classification on the information box. Refer the
You can prevent your children from watching certain programs by specifying a basis classification.
To specify a basis classification, select the System Setting > Parental Control menu.
At this time, you have to enter Personal Identification Number (PIN). The default personal identification number is ‘0000’.
Set the Censorship option to your desired classification among the followings:
No block restricting no program.
Total block restricting every program.
G restricting no program. G stands for General, content of which is very mild.
3.4 Parental control 23
PG restricting PG or above rated programs. PG stands for
Parental Guidance, content of which is mild.
M restricting M or above rated programs. M stands for
Mature, content of which is moderate in impact.
MA restricting MA or above rated programs. MA stands for Mature Accompanied, content of which is strong.
R restricting R rated programs. R stands for Restricted
to adults aged 18 years or over, content of which is very strong.
AV restricting AV rated programs. AV stands for Adult
Video, content of which is very hardcore.
NOTE If a certain program does not have any classification information, your restriction setting will not take effect on it.
If anyone try to watch a program that is out of the basis classification, the person has to enter the personal identification number. To change the number, select the Change PIN Code menu; then an input box appears. You have to enter your desired number twice for confirmation.
You can also restrict uses of some menus. Selecting the Access Control menu displays a list of menus that you can lock.
If the Time Setting item is set to Locked , you have to enter the personal identification number to use when you have selected the Time Setting menu. If you enter a wrong number, you cannot use the menu. Similarly, you have to enter the personal identification number when you have switched on the digital receiver if the IRD Lock item is set to Locked . IRD (Integrated Receiver Decoder) is another name of digital receiver.
To release a shut item, set it to Unlocked .
advertisement
Related manuals
advertisement
Table of contents
- 18 Rear panel connections
- 19 Connecting the digital receiver
- 21 Inserting batteries in the remote control
- 22 Language settings
- 23 Video and audio settings
- 24 Televsion standard
- 24 Color model
- 25 Video cassette recorder
- 26 Television aspect ratio
- 27 Sound mode
- 27 RF output
- 28 Local time setting
- 30 Parental control
- 32 Adjusting on-screen display
- 32 Enabling the time shift function
- 33 Searching broadcasting services
- 34 Resetting to factory settings
- 35 Browsing services
- 37 Viewing program information
- 38 Viewing an electronic program guide
- 39 Selecting an audio track
- 40 Selecting a subtitle track
- 40 Viewing a teletext
- 40 Selecting a multifeed service
- 41 Watching by time shift
- 42 Watching by picture in picture
- 47 Recording a program
- 48 Making a timer recording
- 50 Recording by electronic program guide
- 51 Recording when using time shift
- 52 File list
- 54 Playing back a recording
- 55 To play back in slow motion
- 55 To play back in fast motion
- 56 To play back recordings in sequence
- 56 To make a bookmark
- 57 To play back a recording repeatedly
- 58 Editing a recording
- 58 To erase a block from a recording
- 58 To store a block from a recording
- 59 Playing a MP
- 60 Formatting hard disk
- 64 Updating the firmware
- 66 Transferring the receiver data
- 67 Transferring recording files