Document Conventions. ZyXEL Communications VES-1616F-3X, VES-1616F-3x Series
Add to My manuals310 Pages
ZyXEL VES-1616F-3X is a versatile VDSL switch that offers a comprehensive suite of features for demanding business and residential applications. With its advanced capabilities, you can seamlessly integrate voice, data, and video services over a single VDSL line, providing a robust and reliable network experience.
advertisement
4
Document Conventions
Document Conventions
Warnings and Notes
These are how warnings and notes are shown in this User’s Guide.
1
Warnings tell you about things that could harm you or your device.
"
Notes tell you other important information (for example, other things you may need to configure or helpful tips) or recommendations.
Syntax Conventions
• The VES-1616F-34 or VES-1616F-35 may be referred to as the “Switch”, the “device”, the “system” or the “switch” in this User’s Guide.
• Product labels, screen names, field labels and field choices are all in bold font.
• A key stroke is denoted by square brackets and uppercase text, for example, [ENTER] means the “enter” or “return” key on your keyboard.
• “Enter” means for you to type one or more characters and then press the [ENTER] key.
“Select” or “choose” means for you to use one of the predefined choices.
• A right angle bracket ( > ) within a screen name denotes a mouse click. For example,
Maintenance > Log > Log Setting means you first click Maintenance in the navigation panel, then the Log sub menu and finally the Log Setting tab to get to that screen.
• Units of measurement may denote the “metric” value or the “scientific” value. For example, “k” for kilo may denote “1000” or “1024”, “M” for mega may denote “1000000” or “1048576” and so on.
• “e.g.,” is a shorthand for “for instance”, and “i.e.,” means “that is” or “in other words”.
VES-1616F-3x Series User’s Guide
Document Conventions
Icons Used in Figures
Figures in this User’s Guide may use the following generic icons. The Switch icon is not an exact representation of your device.
Switch Computer Server
Notebook computer DSLAM Gateway
Central Office/ ISP Internet Hub/Switch
VES-1616F-3x Series User’s Guide
5
advertisement
Key Features
- Supports VDSL2 and ADSL2+ standards, providing high-speed broadband access
- Delivers up to 100Mbps downstream and 40Mbps upstream data rates
- Equipped with 16 VDSL2 ports and 4 Gigabit Ethernet ports for flexible connectivity
- Supports VLAN tagging for traffic segregation and security
- Provides advanced QoS features for prioritizing traffic and optimizing network performance
- Offers TR-069 remote management for easy configuration and troubleshooting
- Compact and fanless design for quiet operation in various environments
- Ideal for small businesses, home offices, and residential users seeking a high-performance networking solution
Related manuals
Frequently Answers and Questions
What is the maximum data rate supported by the VES-1616F-3X?
How many VDSL2 ports does the VES-1616F-3X have?
Does the VES-1616F-3X support VLAN tagging?
What type of management interface does the VES-1616F-3X offer?
Is the VES-1616F-3X suitable for home use?
advertisement
Table of contents
- 1 User’s Guide
- 3 About This User's Guide
- 4 Document Conventions
- 6 Safety Warnings
- 9 Table of Contents
- 19 Contents Overview
- 21 List of Figures
- 25 List of Tables
- 29 Introduction
- 31 Getting to Know Your Switch
- 31 1.1 Introduction
- 31 1.2 Applications
- 31 1.2.1 MTU Application
- 32 1.2.2 Curbside Application
- 32 1.3 Ways to Manage the Switch
- 33 1.4 Good Habits for Managing the Switch
- 35 Hardware Installation
- 35 2.1 Mounting the Switch on a Rack
- 35 2.1.1 Rack-mounted Installation Requirements
- 36 2.1.2 Attaching the Mounting Brackets to the Switch
- 36 2.1.3 Mounting the Switch on a Rack
- 37 Hardware Overview
- 37 3.1 Front Panel Connection
- 37 3.1.1 VDSL and POTS Connections
- 38 3.1.2 Gigabit Ethernet Ports
- 38 3.1.3 Mini-GBIC Slots
- 39 3.1.4 Console Port
- 40 3.1.5 Power Connector
- 40 3.2 LEDs
- 43 Status and Basic
- 45 The Web Configurator
- 45 4.1 Introduction
- 45 4.2 System Login
- 46 4.3 The Status Screen
- 50 4.3.1 Change Your Password
- 50 4.4 Switch Lockout
- 51 4.5 Resetting the Switch
- 51 4.5.1 Reload the Configuration File
- 52 4.6 Logging Out of the Web Configurator
- 52 4.7 Help
- 53 System Status and Port Statistics
- 53 5.1 Overview
- 53 5.2 Port Status Summary
- 54 5.2.1 VDSL Summary
- 55 5.2.2 VDSL Port Details
- 59 5.2.3 Ethernet Port Details
- 63 Basic Setting
- 63 6.1 Overview
- 63 6.2 System Information
- 65 6.3 General Setup
- 67 6.4 Introduction to VLANs
- 68 6.5 Switch Setup Screen
- 69 6.6 IP Setup
- 70 6.6.1 Management IP Address
- 72 6.7 Port Setup
- 75 6.8 VDSL Parameters
- 75 6.8.1 Frequency Band Plan
- 75 6.8.2 Configured Versus Actual Rate
- 76 6.8.3 PSD
- 76 6.8.4 UPBO
- 76 6.8.5 Latency Modes
- 76 6.8.6 Rate Adaption
- 77 6.8.7 RFI (Radio Frequency Interference)
- 77 6.8.8 VDSL Profiles
- 77 6.9 VDSL Profile Setup
- 80 6.10 VDSL Alarm Profile Setup
- 82 6.11 VDSL PSD Profile Setup
- 85 Advanced
- 87 VLAN
- 87 7.1 Introduction to IEEE 802.1Q Tagged VLAN
- 87 7.1.1 Forwarding Tagged and Untagged Frames
- 88 7.2 Automatic VLAN Registration
- 88 7.2.1 GARP
- 88 7.2.2 GVRP
- 89 7.3 Port VLAN Trunking
- 89 7.4 Select the VLAN Type
- 89 7.5 Static VLAN
- 90 7.5.1 Static VLAN Status
- 91 7.5.2 Configure a Static VLAN
- 92 7.5.3 Configure VLAN Port Setting
- 93 7.6 Port-based VLAN
- 93 7.6.1 Configure a Port-based VLAN
- 97 Static MAC Forward Setup
- 97 8.1 Static MAC Forwarding Overview
- 97 8.2 Configuring Static MAC Forwarding
- 99 Filtering
- 99 9.1 Filtering Overview
- 99 9.2 Configure a Filtering Rule
- 101 Spanning Tree Protocol
- 101 10.1 STP/RSTP Overview
- 101 10.1.1 STP Terminology
- 102 10.1.2 How STP Works
- 102 10.1.3 STP Port States
- 103 10.2 STP Status
- 104 10.3 Configure STP
- 107 Bandwidth Control
- 107 11.1 Configuring Bandwidth Control
- 107 11.1.1 CIR and PIR
- 109 Broadcast Storm Control
- 109 12.1 Broadcast Storm Control Overview
- 109 12.2 Broadcast Storm Control Setup
- 111 Mirroring
- 111 13.1 Mirroring Overview
- 111 13.2 Port Mirroring Configuration
- 113 Link Aggregation
- 113 14.1 Link Aggregation Overview
- 113 14.1.1 Dynamic Link Aggregation
- 114 14.1.2 Link Aggregation ID
- 114 14.2 Link Aggregation Status
- 115 14.3 Link Aggregation Setup
- 117 Port Authentication
- 117 15.1 Port Authentication Overview
- 117 15.1.1 RADIUS
- 117 15.2 Configure Port Authentication
- 118 15.2.1 Activate IEEE 802.1x Security
- 119 15.2.2 Configuring RADIUS Server Settings
- 121 Port Security
- 121 16.1 Port Security Overview
- 121 16.2 Port Security Setup
- 123 Queuing Method
- 123 17.1 Queuing Method Overview
- 123 17.1.1 Strict Priority Queuing (SPQ)
- 124 17.1.2 Weighted Fair Scheduling (WFS)
- 124 17.2 Configuring Queuing
- 127 Classifier
- 127 18.1 Classifier Overview
- 127 18.2 Configuring a Classifier
- 130 18.3 Classifier Example
- 133 Policy
- 133 19.1 Policy Overview
- 133 19.1.1 DiffServ
- 133 19.1.2 DSCP and Per-Hop Behavior
- 134 19.2 Configuring a Policy
- 137 19.3 Policy Example
- 139 VLAN Stacking
- 139 20.1 VLAN Stacking Overview
- 139 20.1.1 VLAN Stacking Example
- 140 20.2 VLAN Stacking Port Roles
- 141 20.3 VLAN Tag Format
- 141 20.3.1 Frame Format
- 142 20.4 Configuring VLAN Stacking
- 145 Multicast
- 145 21.1 Multicast Overview
- 145 21.1.1 IP Multicast Addresses
- 145 21.1.2 IGMP Filtering
- 145 21.1.3 IGMP Snooping
- 146 21.2 Multicast Status
- 146 21.3 Multicast Setup
- 148 21.4 IGMP Filtering Profile
- 149 21.5 MVR Overview
- 150 21.5.1 Types of MVR Ports
- 150 21.5.2 MVR Modes
- 150 21.5.3 How MVR Works
- 151 21.6 General MVR Configuration
- 152 21.7 MVR Group Configuration
- 154 21.7.1 MVR Configuration Example
- 157 Differentiated Services
- 157 22.1 DiffServ Overview
- 157 22.1.1 DSCP and Per-Hop Behavior
- 157 22.1.2 DiffServ Network Example
- 158 22.2 Activating DiffServ
- 159 22.3 DSCP-to-IEEE802.1p Priority Setting
- 159 22.3.1 Configuring DSCP Setting
- 161 Routing Protocol
- 163 Static Route
- 163 23.1 Configuring Static Route
- 165 DHCP Relay
- 165 24.1 DHCP Overview
- 165 24.1.1 DHCP Relay Agent Information
- 165 24.2 Configuring DHCP Relay
- 167 Management
- 169 Maintenance
- 169 25.1 The Maintenance Screen
- 170 25.2 Load Factory Default
- 170 25.3 Reboot System
- 171 25.4 Remote Device Upgrade
- 172 25.5 VDSL Chip Reset
- 172 25.6 Remote Device Reset
- 173 25.7 Firmware Upgrade
- 174 25.8 Restore a Configuration File
- 174 25.9 Backing Up a Configuration File
- 175 25.10 FTP Command Line
- 175 25.10.1 Filename Conventions
- 176 25.10.2 FTP Command Line Procedure
- 176 25.10.3 GUI-based FTP Clients
- 177 25.10.4 FTP Restrictions
- 179 Access Control
- 179 26.1 Access Control Overview
- 179 26.2 The Access Control Main Screen
- 180 26.3 About SNMP
- 181 26.3.1 Supported MIBs
- 181 26.3.2 SNMP Traps
- 182 26.3.3 Configuring SNMP
- 182 26.4 Setting Up Login Accounts
- 184 26.5 SSH Overview
- 184 26.6 How SSH works
- 185 26.7 SSH Implementation on the Switch
- 185 26.7.1 Requirements for Using SSH
- 185 26.7.2 SSH Login Example
- 186 26.8 Introduction to HTTPS
- 187 26.9 HTTPS Example
- 187 26.9.1 Internet Explorer Warning Messages
- 188 26.9.2 Netscape Navigator Warning Messages
- 188 26.9.3 The Main Screen
- 189 26.10 Service Access Control
- 190 26.11 Remote Management
- 191 Diagnostic
- 191 27.1 Diagnostic
- 193 Syslog
- 193 28.1 Syslog Overview
- 193 28.2 Syslog Setup
- 194 28.3 Syslog Server Setup
- 197 Cluster Management
- 197 29.1 Cluster Management Overview
- 198 29.2 Cluster Management Status
- 199 29.2.1 Cluster Member Switch Management
- 200 29.3 Configuring Cluster Management
- 203 MAC Table
- 203 30.1 MAC Table Overview
- 204 30.2 Viewing the MAC Table
- 205 ARP Table
- 205 31.1 ARP Table Overview
- 205 31.1.1 How ARP Works
- 205 31.2 Viewing the ARP Table
- 207 Commands, Troubleshooting and Specifications
- 209 Introducing the Commands
- 209 32.1 Overview
- 209 32.1.1 Switch Configuration File
- 210 32.2 Accessing the CLI
- 210 32.2.1 Multiple Login
- 210 32.2.2 The Console Port
- 211 32.2.3 Telnet
- 212 32.2.4 SSH
- 212 32.3 The Login Screen
- 212 32.4 Command Syntax Conventions
- 213 32.5 Getting Help
- 213 32.5.1 List of Available Commands
- 214 32.5.2 Detailed Command Information
- 214 32.6 Changing the Password
- 215 32.7 Account Privilege Levels
- 215 32.8 Command Modes
- 216 32.9 Using Command History
- 217 32.10 Saving Your Configuration
- 217 32.10.1 Logging Out
- 217 32.11 Command Summary
- 217 32.11.1 User Mode
- 218 32.11.2 Enable Mode
- 223 32.11.3 General Configuration Mode
- 233 32.11.4 interface Commands
- 236 32.11.5 mvr Commands
- 237 32.11.6 vdsl-alarmprofile Commands
- 238 32.11.7 vdsl-profile Commands
- 240 32.11.8 vlan Commands
- 243 Command Examples
- 243 33.1 Overview
- 243 33.2 show Commands
- 243 33.2.1 show interface
- 244 33.2.2 show ip
- 244 33.2.3 show logging
- 244 33.2.4 show mac address-table all
- 245 33.2.5 show multi-login
- 245 33.2.6 show system-information
- 246 33.2.7 show vdsl-alarmprofile
- 246 33.2.8 show vdsl-profile
- 247 33.3 ping
- 248 33.4 traceroute
- 249 33.5 Enabling RSTP
- 249 33.6 vdsl-port Command
- 249 33.7 Configuration File Maintenance
- 249 33.7.1 Backing up Configuration
- 250 33.7.2 Restoring Configuration
- 250 33.7.3 Resetting to the Factory Default
- 251 33.8 no Command Examples
- 251 33.8.1 no mirror port
- 251 33.8.2 no https timeout
- 251 33.8.3 no trunk
- 252 33.8.4 no port-access-authenticator
- 252 33.8.5 no ssh
- 253 33.9 interface Commands
- 253 33.9.1 interface port-channel
- 253 33.9.2 bpdu-control
- 254 33.9.3 broadcast-limit
- 254 33.9.4 bandwidth-limit
- 255 33.9.5 mirror
- 255 33.9.6 gvrp
- 256 33.9.7 ingress-check
- 256 33.9.8 frame-type
- 256 33.9.9 egress set
- 257 33.9.10 qos priority
- 257 33.9.11 name
- 258 33.9.12 speed-duplex
- 259 IEEE 802.1Q Tagged VLAN Commands
- 259 34.1 Configuring Tagged VLAN
- 260 34.2 Global VLAN1Q Tagged VLAN Configuration Commands
- 260 34.2.1 GARP Status
- 260 34.2.2 GARP Timer
- 261 34.2.3 GVRP Timer
- 261 34.2.4 Enable GVRP
- 261 34.2.5 Disable GVRP
- 261 34.3 Port VLAN Commands
- 261 34.3.1 Set Port VID
- 262 34.3.2 Set Acceptable Frame Type
- 262 34.3.3 Enable or Disable Port GVRP
- 262 34.3.4 Modify Static VLAN
- 263 34.3.5 Forwarding Process Example
- 264 34.4 Delete VLAN ID
- 264 34.5 Enable VLAN
- 264 34.6 Disable VLAN
- 264 34.7 Show VLAN Setting
- 267 Troubleshooting
- 267 35.1 Problems Starting Up the Switch
- 267 35.2 Problems Accessing the Switch
- 268 35.3 Problem with the VDSL Connection
- 268 35.3.1 Pop-up Windows, JavaScripts and Java Permissions
- 273 35.4 Problems with the Password
- 275 Product Specifications
- 283 Appendices and Index
- 285 IP Addresses and Subnetting
- 295 Legal Information
- 299 Customer Support
- 303 Index