troubleshooting. Samsung P6091


Add to my manuals
21 Pages

advertisement

troubleshooting. Samsung P6091 | Manualzz

Troubleshooting

The washing machine will not start

Make sure the door is firmly closed.

Make sure the washing machine is plugged in.

Make sure the water source faucet is turned on.

Make sure to press the Start/Pause button.

No water or insufficient water supply

Make sure the water source faucet is turned on.

Make sure the water source hose is not frozen.

Make sure the water intake hose is not bent.

Make sure the filter on the water intake hose is not clogged.

Detergent remains in the detergent drawer after the wash program is complete

Make sure the washing machine is running with sufficient water pressure.

Put the detergents in the inner parts of the detergent drawer (away from the outside edges).

Washing machine vibrates or is too noisy

Make sure the washing machine is set on a level surface. If the surface is not level, adjust the washing machine feet to level the appliance (see page 3).

Make sure that the shipping bolts are removed (see page 3).

Make sure the washing machine is not touching any other object.

Make sure the laundry load is balanced.

The washing machine does not drain and/or spin

Make sure the drain hose is not squashed or bent.

Make sure the water hose mesh filter is not clogged (see page 13).

Before contacting After-Sales service;

1. Try to remedy the problem (See “Trouble shooting guide”).

2. Restart the programme to see if the fault is repeatedo.

3. If the malfunction persists, call After-sales service and specify.

14 SAMSUNG Washing Machine Owner’s Instructions

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Fuzzy logic technology for optimal cleaning results
  • Prewash cycle for heavily soiled clothes
  • Manual wash cycle for customized washing
  • Adjustable leveling feet for stability on uneven surfaces
  • Easy-to-use control panel with LED display
  • Large capacity (6 kg) for washing large loads
  • Energy-efficient design to save energy and money

Related manuals

Frequently Answers and Questions

How do I remove the shipping bolts from the washing machine?
To remove the shipping bolts, loosen all bolts with the supplied wrench before removing them. Take each bolt head and pull it through the wide part of the hole. Fill the holes with the supplied plastic covers.
How do I connect the water supply hose to the washing machine?
First, remove the adaptor from the water supply hose. Then, loosen the four screws on the adaptor with a "+" type screwdriver. Connect the adaptor to the water tap by tightening the screws firmly. Finally, connect the water supply hose to the adaptor.
How do I adjust the leveling feet on the washing machine?
If the floor is uneven, adjust the feet (do not insert pieces of wood, or any other objects under the feet): Loosen the leg bolt by turning it with your hand until it is at the desired height. Tighten the locking nut by turning it with the supplied wrench.
Download PDF

advertisement