- No category
advertisement
ITALIAN TECHNOLOGY grifo ®
INTRODUCTION
The use of these devices has turned - IN EXCLUSIVE WAY - to specialized personnel.
This device is not a safe component as defined in directive 98-37/CE.
Pins of Mini Module are not provided with any kind of ESD protection. They are connected directly to their respective pins of microcontroller. Mini Module is affected by electrostatic discharges.
Personnel who handles Mini Modules is invited to take all necessary precautions to avoid possible damages caused by electrostatic discharges.
The purpose of this handbook is to give the necessary information to the cognizant and sure use of the products. They are the result of a continual and systematic elaboration of data and technical tests saved and validated from the manufacturer, related to the inside modes of certainty and quality of the information.
The reported data are destined- IN EXCLUSIVE WAY- to specialized users, that can interact with the devices in safety conditions for the persons, for the machine and for the enviroment, impersonating an elementary diagnostic of breakdowns and of malfunction conditions by performing simple functional verify operations , in the height respect of the actual safety and health norms.
The informations for the installation, the assemblage, the dismantlement, the handling, the adjustment, the reparation and the contingent accessories, devices etc. installation are destined - and then executable - always and in exclusive way from specialized warned and educated personnel, or directly from the TECHNICAL AUTHORIZED ASSISTANCE, in the height respect of the manufacturer recommendations and the actual safety and health norms.
The devices can't be used outside a box. The user must always insert the cards in a container that rispect the actual safety normative. The protection of this container is not threshold to the only atmospheric agents, but specially to mechanic, electric, magnetic, etc. ones.
To be on good terms with the products, is necessary guarantee legibility and conservation of the manual, also for future references. In case of deterioration or more easily for technical updates, consult the AUTHORIZED TECHNICAL ASSISTANCE directly.
GMM AM128 Rel. 5.00
Page 1
grifo ®
ITALIAN TECHNOLOGY
To prevent problems during card utilization, it is a good practice to read carefully all the informations of this manual. After this reading, the user can use the general index and the alphabetical index, respectly at the begining and at the end of the manual, to find information in a faster and more easy way.
Page 2 GMM AM128 Rel. 5.00
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
advertisement
Table of contents
- 9 INTRODUCTION
- 11 CARD VERSION
- 12 GENERAL INFORMATION
- 14 DIGITAL I/O LINES
- 14 SERIAL COMMUNICATION
- 14 CLOCK
- 16 MEMORY DEVICES
- 16 C BUS INTERFACE
- 16 SPI INTERFACE
- 17 DIP SWITCH
- 18 A/D CONVERTERS
- 18 ANALOG COMPARATOR
- 18 TIMER COUNTER AND PWM
- 18 WATCH DOG
- 18 REAL TIME CLOCK
- 20 TECHNICAL FEATURES
- 20 GENERAL FEATURES
- 21 PHYSICAL FEATURES
- 21 ELECTRIC FEATURES
- 22 INSTALLATION
- 22 VISUAL SIGNALATIONS
- 22 CONNECTIONS
- 22 CN1 - EXTERNAL POWER SUPPLY CONNECTOR
- 24 MINI MODULE CONFIGURATION
- 26 SERIAL COMMUNICATION SELECTION
- 28 CONNECTOR SIGNALS INTERFACEMENT
- 28 POWER SUPPLY
- 29 INTERRUPTS
- 29 JTAG INTERFACE
- 30 SUPPORT CARDS
- 30 USE WITH GMB HR168 MODULE
- 32 USE WITH GMM TST2 MODULE
- 34 HOW TO START
- 38 RICOMPILATION WITH BASCOM AVR
- 40 RICOMPILATION WITH ICC AVR
- 42 SOFTWARE DESCRIPTION
- 44 PERIPHERAL DEVICES SOFTWARE DESCRIPTION
- 44 ACTIVITY LEDS
- 44 DIP SWITCH
- 45 BACKED SRAM + SERIAL RTC
- 45 CPU INTERNAL PERIPHERALS
- 46 BIBLIOGRAPHY