<b>Electrical connection </b>. Miele KM5656, KM5676, KM 5676

Electrical connection

,

CAUTION: Before installation or servicing, disconnect the power supply by either removing the fuse, shutting off the power main or manually "tripping" the circuit breaker.

Installation work and repairs should only be performed by a qualified technician in accordance with all applicable codes and standards.

Before connecting the appliance to the power supply, make sure that the voltage and frequency listed on the data plate correspond with the household electrical supply. This data must correspond to prevent appliance damage. Consult an electrician if in doubt.

Only operate the cooktop after it has been installed into the countertop.

Installer:

Please leave these instructions with the consumer.

Power supply

^ Make sure your electrical supply matches the data plate.

Connection

The cooktop is equipped with a flexible power cord consisting of 3 wires ready for connection to a grounded power supply.

208/240 V, 60 Hz, 40 A fuse rating.

Black wire: connect to L1 (hot)

Red wire: connect to L2 (hot)

Green wire: connect to GND (ground)

A dedicated line and junction box should be used to connect the cooktop to a 40 A circuit.

For further information, see the wiring diagram provided with the appliance.

,WARNING:

THIS APPLIANCE MUST BE

GROUNDED!

40