Setting the temperature. Miele KWT4154

Optimum temperature and air quality

^ Press the temperature selector (+/-) buttons for the upper zone to select either Fahrenheit °F or Celsius °C:

^ To save the setting, press the constant humidity button.

^ To exit the settings mode, press the

On/Off button. Otherwise, the electronics will automatically return to normal mode after approx. 2 minutes.

Setting the temperature

The temperature for each respective zone can be set using the "+ / -" buttons below the temperature displays.

When pressing the buttons, the following changes will appear in the respective temperature display:

– When first pressed: The last

temperature selected flashes.

– Each subsequent press of the button: adjusts the temperature in increments of 1 °.

– Holding down the button will adjust the temperature continuously.

Approximately 5 seconds after the button is released, the actual temperature in the respective zone will be displayed.

The two temperature zones are cooled alternately, so depending on the quantity of wine being stored, it may take several hours for the desired temperature to be reached, and for the temperature display to adjust. If, after this amount of time, the temperature is still too high or too low, you will need to adjust it again.

+ button: increases the temperature

- button: decreases the temperature

The temperature being set will flash in the display.

Temperature range

The temperature in both sections can be set to anywhere between 41°F (5°C) and 68°F (20°C).

11