Operating Instructions Dishwasher G 2183 en - US, CA

Before using for the first time

Programming the water softener

To exit the programming mode at any time, turn the dishwasher off with the "O" button.

^ Turn the dishwasher off with "o".

^ Press and hold the "Program" and "g" buttons simultaneously. Hold the program button until the lower right program indicator lights.

If it does not come on, start over.

^ Press the "Program" button twice.

The "Intake/Drain" indicator

The "Intake/Drain" indicators flashes twice in the display.

The "SaniWash" indicator flashes once in intervals (factory default).

^ Press the "Program" button for at least one second, until the

"Intake/Drain" indicator lights up.

The amount set can be recognized by the flashing rhythm of the "SaniWash" indicator (see table):

°d

1 - 4

5 - 7

8 - 11

12 - 15

16 - 20

21 - 25

26 - 30

31 - 36

37 - 45

46 - 70 gr/gal

1 - 4

5 - 7

8 - 11

13 - 16

17 - 21

22 - 26

27 - 31

32 - 38

39 - 47

48 - 73

Flashing rhythm once twice

3 times

4 times

5 times

6 times

7 times

8 times

9 times

1 long flash

^ Select the desired setting with the

"Program" button. Every touch of the button increases the level.

The programmed dosage is saved.

^ Turn the dishwasher off "V".

Checking the programmed water hardness level

^ Turn the dishwasher off "V".

^ Press the "Program" button, at the same time turn the dishwasher on " g".

Hold the "Program" button in until the indicator lights up.

^ Press the "Program" button twice.

The amount set can be recognized by the flashing rhythm of the "SaniWash" indicator (see table).

^ Turn the dishwasher off "V".

12