advertisement
▼
Scroll to page 2
of 42
G/GS 5.6A
5.9
Engine Speed
Maintenance
See Graphic: wc_gr000114
Generators require a fixed engine speed to maintain the correct voltage. Engine speed is controlled by a governor which automatically adjusts to varying loads on the engine to maintain a constant speed of
3000 rpm. There is no throttle control.
To set the engine to the proper speed:
Turn the speed adjusting screw (a) in or out to obtain a no-load speed of 3000 rpm.
CAUTION: Setting the engine speed too high or too low may damage tools and other appliances attached to the generator.
a wc_gr000114 wc_tx000164gb.fm
33
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
Frequently Answers and Questions
What type of fuel does the G5.6A generator use?
The G5.6A generator uses unleaded gasoline with a minimum octane rating of 87.
How many receptacles does the G5.6A generator have?
The G5.6A generator has two 120V receptacles and one 240V receptacle.
What is the maximum wattage that the G5.6A generator can produce?
The G5.6A generator can produce a maximum of 5,600 watts of power.
Does the G5.6A generator have an electric start?
No, the G5.6A generator does not have an electric start. It must be started manually with a recoil starter.
How long can the G5.6A generator run on a full tank of fuel?
The G5.6A generator can run for up to 8 hours on a full tank of fuel at 50% load.
advertisement