Connecting to the Internet. Acer Predator G9-592, Predator G9-591R, Predator 15 G9-593, Predator G9-591, Predator G9-593

Connecting to the Internet - 33

C

O N N E C T I N G T O T H E

I

N T E R N E T

This chapter includes general information on types of connections, and getting connected to the internet. Some of this information may not apply to your computer. For

detailed information, please refer to Network connections

on page 84.

Your computer’s built-in network features make it easy for you to connect your computer to the internet using a cable or a wireless connection.

First though, in order to connect to the internet, you’ll need to sign up for internet services from an ISP (Internet

Service Provider) -- usually a phone or cable company -- that will have to go to your home or office to set up internet service. The ISP will install a small box, a router or modem, that will allow you to connect to the internet.

Connecting to a wireless network

Connecting to a wireless LAN

A wireless LAN (or WLAN) is a wireless local area network, which can link two or more computers without using wires.

Once connected to WLAN, you can access the internet. You can also share files, other devices, and even your internet connection itself.

Warning

Using wireless devices while flying in aircraft may be prohibited.

All wireless devices must be switched off before boarding an aircraft and during take-off, as they may be dangerous to the operation of the aircraft, disrupt communications, and even be illegal. You may turn on your computer’s wireless devices only when informed that it is safe to do so by the cabin crew.

Your computer's wireless connection is turned on by default and Windows will detect and display a list of available

34 - Connecting to the Internet networks during setup. Select your network and enter the password if required.

Predator notebook computers feature an Airplane mode hotkey that turns the network connection on or off. You can use the network management options to turn your wireless network on/off or control what is shared over the network.

To connect to a wireless network, please follow the steps below.

1. Ensure you have a wireless router/access point and current internet connection through the ISP of your choice. Make a note of the wireless network’s name and password (if necessary). If you are trying to connect to a public network (such as at a coffeeshop), make sure you have the wireless network’s name.

Note

Please refer to your ISP or router documentation for details on connecting to the internet.

2. In the icon tray in the lower right-hand corner of the screen, select the Notifications icon to open the

Notifications pane.

3. Select All settings.

4. Select Network & internet.

Connecting to the Internet - 35

5. You will see a list of available wireless networks. Select the one you wish to use.

36 - Connecting to the Internet

6. Once you select a wireless network, select Connect.

7. If required, enter the network’s password.

Connecting with a cable

Built-in network feature

Plug one end of a network cable into the network port on your computer, and the other end into a port on your router.

Connecting to the Internet - 37

(Refer to the image below.) Then, you'll be ready to get online.

Connecting to a cellular network

If your computer has a SIM slot, you can connect to the internet using a cellular phone network. To do this, you must have a compatible SIM card and a data contract with your cellular provider. Contact your cellular provider for more information on connecting to the internet using a cellular network.