ANTENNA CONNECTIONS. Toshiba MV20P2

ANTENNA CONNECTIONS

If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a cable TV service (CABLE), see page 12 for Cable TV connections.

Combination VHF/UHF antenna (Single 75 ohm cable or 300 ohm twin-lead wire)

Connect the 75 ohm cable from the combination VHF/

UHF antenna to the antenna jack.

ANT.

ANT.

If your combination VHF/UHF antenna has a 300 ohm twin-lead wire, the use of the 300-75 ohm matching transformer may be necessary.

75 ohm coaxial cable

Antenna jack

300-75 ohm matching transformer

Antenna jack

Combination VHF/UHF antenna (Separate VHF and UHF 300 ohm twin-lead wires)

ANT.

300-75 ohm matching transformer

Connect the UHF 300 ohm twin-lead wire to the combiner (not supplied). Connect the VHF 300 ohm twin-lead wire to the 300-75 ohm matching transformer. Attach the transformer to the combiner, then attach the combiner to the antenna jack.

Antenna jack

Combiner

UHF 300 ohm

VHF 300 ohm

Separate VHF/UHF antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)

Connect the VHF 75 ohm cable and UHF 300 ohm twin-lead wire to the combiner (not supplied). Attach the combiner to the antenna jack.

ANT.

Antenna jack

Combiner

UHF 300 ohm

VHF 75 ohm

11

5L90101C P10-19 11 20/4/04, 16:32