Reversing the door position. Insignia NS-RTM21SS7, 21cu. ft. Top Mount Refrigerator, 21cu. ft. Top Mount Refrigerator NS-RTM21SS7

NS-RTM21SS7_16-0632_MAN_V4_ENG.fm Page 10 Wednesday, August 10, 2016 3:54 PM

NS-RTM21SS7

Reversing the door position

Based on the location where you plan to use your refrigerator, you may find it more convenient to reverse the position of the door, to have it open from right to left instead of left to right.

Caution

To avoid injury to yourself or your property, we recommend that someone assist you during the door reversal process.

Preparing to reverse the door position

You will need: A standard screwdriver, a Phillips screwdriver, and the included Allen wrench.

• Make sure that your refrigerator is unplugged and empty.

• Have someone available to assist you in the process.

• Keep all of the parts you remove to reuse them later.

Reversing the door position

Parts included with the hinge kit:

Left top hinge cover

Top left hinge Cover

Parts already mounted on the door (as shipped):

Center hinge

Right top hinge cover

Top right hinge

Bottom hinge

Door block

10 www.insigniaproducts.com


21 cu.ft. Top Mount Refrigerator

1 Unplug your refrigerator and remove all food from the door shelves.

2 Remove the left cover plate and the right top hinge cover, then unscrew and remove the right top hinge. Keep the screws to reuse.

Right top hinge cover

Left cover plate

3 Lift the freezer door up and away from your refrigerator.

4 Remove the hinge pin, the three screws, and the center hinge, then lift the refrigerator door up and away from your refrigerator. Save the screws to reuse.

Center hinge www.insigniaproducts.com

11


NS-RTM21SS7

5 Unscrew the two screws holding the bottom hinge, then remove the bottom hinge from the bottom right side of the refrigerator.

6 Unscrew the hinge pin from the right side of the bottom hinge and move it to the left side, then screw the bottom hinge to the bottom left side of the refrigerator, using the screws you removed previously.

7 Remove the hole cap from the top left of the refrigerator door and insert it in the other side.




8 Remove the door block from the bottom, right side of the refrigerator door and attach it to the other side.

9 Remove the door block from the bottom, right side of the freezer door and attach it to the bottom, left side.

www.insigniaproducts.com

13


NS-RTM21SS7

10 Remove the two hole caps from the left side, where the center hinge will go, and insert them into the other side.

11 Attach the refrigerator door on the bottom hinge, then attach the center left hinge to the left side of the refrigerator with two screws.

Insert the hinge pin into the center hinge and tighten with a Phillips screwdriver until the shoulder of the hinge pin is touching the center hinge.




12 Put the freezer door onto the center left hinge, then attach the top left hinge to the top of refrigerator. Cover the hinge with the top left hinge cover and cover the screw holes on the right side of the top with the cover plate you previously removed.

Attach the top left hinge

13 Add covers to the screw holes and hinge pivot.

www.insigniaproducts.com

15

Reversing the door position. Insignia NS-RTM21SS7, 21cu. ft. Top Mount Refrigerator, 21cu. ft. Top Mount Refrigerator NS-RTM21SS7

Reversing the door position

Preparing to reverse the door position