Controls. NEC AccuSync AS222Wi

Controls

OSD (On-Screen Display) Control Functions

1. Basic functions of the touch keys on the front of the monitor

OSD Menu INPUT/RESET

Not displaying on screen Selects input signal.

Displaying on screen

Icon Select

Function Adjustment Reset the function.

SELECT –

Displays OSD.

Shortcut to Brightness.

Displays OSD menu and selects function icon.

Adjusts the function of the selected icon.

Moves leftward.

Adjusts down.

+

Shortcut to Contrast.

Moves rightward.

Adjusts up.

NOTE: You can directly change to LOW BLUE LIGHT MODE by touching the SELECT key for 3 seconds or more.

2. OSD structure

Example:

Main Menu (Icon Select) Main Menu (Adjust)

Touch

“SELECT” key

Touch

“SELECT” key again

Touch “SELECT” key

Example: TOOL sub menu

Touch “SELECT” key

Touch

“SELECT” key

Touch “–” or

“+” to select an icon

Sub Menu (Icon Select)

Touch

“–” or “+”

Touch

“SELECT” key

Sub Menu (Adjust)

Select by using

“–” or “+”

Adjust by using

“–” or “+”

English-8

BRIGHTNESS

Adjusts the overall image and background screen brightness.

To enter the ECO MODE, touch the “INPUT/RESET” key.

ECO MODE OFF: Sets brightness variable from 0% to 100%.

ECO MODE1: Sets brightness 80%.

ECO MODE2: Sets brightness 40%.

NOTE: When DV MODE is ON, ECO MODE is set to OFF and cannot be changed.

CONTRAST

Adjusts the image brightness in relation to the background.

To enter the DV MODE setting, select CONTRAST icon and set DV MODE to OFF then touch the “INPUT/RESET” key.

DV MODE: Setting that adjusts the brightness by detecting the screen’s black areas and optimizes it.

NOTE: “OFF” is used for TCO Certifi cate compliance.

NOTE: CONTRAST and DV MODE can be adjusted when other than L/B is selected for COLOR CONTROL.

AUTO CONTRAST (Analog input only)

Automatically adjusts the image displayed for non-standard video inputs.

AUTO ADJUST (Analog input only)

Automatically adjusts the Image Position, the H. Size and Fine settings.

LEFT/RIGHT (Analog input only)

Controls Horizontal Image Position within the display area of the LCD.

DOWN/UP (Analog input only)

Controls Vertical Image Position within the display area of the LCD.

H. SIZE (Analog input only)

Adjusts the horizontal size by increasing or decreasing this setting.

FINE (Analog input only)

Improves focus, clarity and image stability by increasing or decreasing this setting.

COLOR CONTROL SYSTEMS

Six color presets (9300 / 7500 / sRGB / USER / NATIVE / L/B) select the desired color setting.

NOTE: You can directly change to LOW BLUE LIGHT MODE by touching the SELECT key for 3 seconds or more.

For changing to other settings from L/B mode, touch the SELECT key to show OSD menu and enter

When L/B is selected in COLOR control, CONTRAST and DV MODE are disabled.

RED

Increases or decreases Red. The change will appear on screen.

GREEN

Increases or decreases Green. The change will appear on screen.

BLUE

Increases or decreases Blue. The change will appear on screen.

TOOL

Selecting TOOL allows you to get into the sub menu. See page 10.

Selecting OSD TOOL allows you to get into the sub menu. See page 11.

English-9

Selecting Factory Preset allows you to reset all OSD control settings back to the factory settings except MUTE,

CARBON SAVINGS, CARBON USAGE, and SIGNAL INFORMATION. Individual settings can be reset by highlighting the control to be reset and touching the INPUT/RESET key.

EXIT

Selecting EXIT allows you to exit OSD menu/sub menu.

TOOL

EXPANSION

Selects the zoom mode.

This function works, when input signal timing is under native resolution.

FULL: The image is expanded to full screen, regardless of the resolution.

ASPECT: The image is expanded without changing the aspect ratio.

Turns the Response Improve function ON or OFF.

Response Improve may reduce blurring that occurs in some moving images.

DDC/CI

This function allows the DDC/CI function ON or OFF.

Displays the estimated carbon saving information in kg.

The carbon footprint factor in the carbon saving calculation is based on the OECD (2008 Edition).

The carbon saving information can be reset by touching the INPUT/RESET key.

Displays the estimated carbon usages information in kg.

This is the arithmetic estimation, not actual measurement value.

The carbon footprint factor in the carbon usage calculation is based on the OECD (2008 Edition).

The carbon usage information can be reset by touching the INPUT/RESET key.

Indicates the model and serial numbers of your monitor.

INPUT RESOLUTION (Analog input only)

This function works when user selects one of the special input signal timings below.

Select one of the following pair of resolutions as the input signal priority:

1280 x 768 or 1360 x 768 or 1366 x 768 (vertical resolution 768),

1600 x 900 or 1280 x 960 (horizontal frequency 60 kHz, vertical frequency 60 Hz),

1400 x 1050 or 1680 x 1050 (vertical resolution 1050).

English-10

OSD TOOL

LANGUAGE

OSD control menus are available in nine languages.

The OSD control menu will stay on as long as it is in use. In the OSD TURN OFF sub menu, you can select how long the monitor waits after the last touch of a key to shut off the OSD control menu. The preset choices are

10 - 120 seconds by 5 seconds step.

OSD LOCK OUT

This control completely locks out access to all OSD control functions except for VOLUME, BRIGHTNESS and

CONTRAST. To activate the OSD LOCK OUT function, enter the OSD TOOL sub menu, select “OSD LOCK OUT”, touch and hold the “INPUT/RESET” key and “+” simultaneously until “OSD LOCKED OUT” indicator appears. To deactivate, touch the SELECT key, then repeat the same steps until OSD main menu displays on screen.

If you select “ON”, monitor displays “VIDEO INPUT MENU” after changing the input.

If you select “OFF”, monitor doesn’t display “VIDEO INPUT MENU” after changing the input.

OSD Warning

OSD Warning menus disappear by touching the SELECT key.

NO SIGNAL: This function gives a warning when there is no signal present. After power is turned on or when there is a change of input signal or video is inactive, the NO SIGNAL window will appear.

OUT OF RANGE: This function gives a recommendation of the optimized resolution and refresh rate. After the power is turned on or there is a change of input signal or the video signal doesn’t have proper timing, the OUT OF RANGE menu will appear.

English-11