Manual Buttonhole. Husqvarna Viking Emerald 122, EMERALD™ 118, TRIBUTE 145M, Emerald 118, EMERALD™ 122, EMERALD™ 116, Emerald 116
Add to My manuals48 Pages
advertisement
▼
Scroll to page 2
of
48
1
Manual Buttonhole
Consult the Sewing Guide Reference
Chart for recommended settings.
If the diameter of the button is more than 2.5 cm (1”), make the buttonhole manually as follows:
1 Snap on buttonhole foot C.
2 a b c
2 Pull the buttonhole lever down as far as it will go. Draw both needle and bobbin thread to the left. Lower the needle into the fabric where the buttonhole is to start, and lower the foot.
a b c
Needle thread
Bobbin thread
Starting point
31
32
6
7
4
5
4 Sew the front bartack and left column to the desired length then stop sewing.
5 Pull the buttonhole lever toward you.
6 Sew the back bartack and right column and then stop sewing at the starting point.
7 When lever up as far as it will go.
advertisement
Key Features
- Automatic needle threader: Effortlessly thread the needle with just the touch of a lever.
- Built-in stitch guide: Quickly and easily select the perfect stitch for your project.
- Variable needle positions: Adjust the needle position for precise topstitching, edge stitching, and more.
- Adjustable stitch length and width: Customize the look of your stitches to suit your fabric and project.
- Reverse lever: Easily sew in reverse to reinforce stitches or create decorative effects.
Related manuals
Frequently Answers and Questions
How do I change the needle?
Refer to page 10 of the manual for detailed instructions on changing the needle.
What is the maximum stitch width?
The maximum stitch width is 5mm.
Can I sew on thick fabrics with this machine?
Yes, the Emerald 122 can handle even the toughest fabrics with ease.
advertisement