Macintosh OS X USB Configuration. Netcomm NB1300PLUS4, NB1300 Plus 4

Macintosh OS X USB Configuration

1. Close any running applications.

2. Execute the Install_USB_ADSL.pkg

program.

3. OS X will then request you enter the passphrase for a user that has administration access to the computer.

Enter the details and click on OK.

4. Click on Continue.

5. Select the drive that contains OS X and then click on Continue.

www.netcomm.com.au

Page 34

Rev. 1- YML674

NB1300Plus4 ADSL Modem

6. Click on Upgrade or Install to continue.

7. Installation of this software requires that you restart your computer when installation is complete. Click on Continue

Installation to continue.

8. Click on Restart.

9. Connect the USB cable from the NB1300 into a spare SUB port on your computer.

10. Open System Preferences from the Dock.

11. Click on Network to display this window.

Click on OK.

Rev. 1 - YML674

NB1300Plus4 ADSL Modem www.netcomm.com.au

Page 35

12. Select the Ethernet Adaptor (en1) from the Show box. Select the TCP/IP tab and select Using

DHCP.

13. Click on Apply Now. Close the Network window and System Preferences.

www.netcomm.com.au

Page 36

Rev. 1- YML674

NB1300Plus4 ADSL Modem