advertisement
.
2.6.4
Shock
All shock specifications assume that the drive is mounted securely with the input shock applied at the drive mounting screws. Shock may be applied in the X, Y or Z axis.
2.6.4.1
Operating shock
These drives comply with the performance levels specified in this document when subjected to a maximum operating shock of 70 Gs
(read) and 40 Gs (write) based on half-sine shock pulses of 2ms. Shocks should not be repeated more than two times per second.
2.6.4.2
Nonoperating shock
The nonoperating shock level that the drive can experience without incurring physical damage or degradation in performance when subsequently put into operation is 250 Gs based on a nonrepetitive half-sine shock pulse of 2ms duration.
2.6.5
Vibration
All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive mounting screws.
Vibration may be applied in the X, Y or Z axis.
2.6.5.1
Operating vibration
The maximum vibration levels that the drive may experience while meeting the performance standards specified in this document are specified below.
5–22 Hz
22–350 Hz
350–500 Hz
20 - 1500Hz
*(RROV)
0.25 Gs
0.50 Gs
0.25 Gs
12.5 rads/s
2
w/RVFF
* Rotary Random Operating Vibration
2.6.5.2
Nonoperating vibration
The maximum nonoperating vibration levels that the drive may experience without incurring physical damage or degradation in performance when subsequently put into operation are specified below.
2–500 Hz
Linear Random
2.27 Grms ref
Freq (Hz)
G
2
/Hz
2
.001
4
.03
100
.03
500
.001
Seagate IronWolf Serial ATA Product Manual, Rev. E 14
advertisement
Key Features
- 14 TB 3.5" 7200 RPM Serial ATA III
- Surveillance system HDD
- Storage drive buffer size: 256 MB
- 6 Gbit/s
- 690 g
Related manuals
advertisement
Table of contents
- 5 Seagate® Technology Support Services
- 6 Introduction
- 6 About the Serial ATA interface
- 7 Drive specifications
- 7 Specification summary tables
- 9 Formatted capacity
- 9 LBA mode
- 9 Recording and interface technology
- 9 Start/stop times
- 10 Power specifications
- 10 Power consumption
- 11 Conducted noise
- 11 Voltage tolerance
- 12 Extended Power Conditions - PowerChoiceTM
- 14 Environmental limits
- 14 Temperature
- 14 Humidity
- 14 Effective Altitude (sea level)
- 15 Shock
- 15 Vibration
- 16 Acoustics
- 16 Test for Prominent Discrete Tones (PDTs)
- 16 Electromagnetic immunity
- 17 Reliability
- 17 Annualized Failure Rate (AFR) and Mean Time Between Failures (MTBF)
- 17 Storage
- 17 Warranty
- 18 Agency and Safety Certifications
- 18 Safety certification
- 18 European Union (EU) CE Marking Requirements
- 18 Australian RCM Compliance Mark
- 18 Canada ICES
- 18 South Korean KC Certification Mark
- 18 Morocco Commodity Mark
- 19 Taiwanese BSMI
- 19 FCC verification
- 19 Environmental protection
- 19 European Union Restriction of Hazardous Substance Law
- 20 China Requirements —China RoHS
- 20 Taiwan Requirements — Taiwan RoHS
- 21 Corrosive environment
- 21 Shipping, Repair and Returns
- 22 Configuring and mounting the drive
- 22 Handling and static-discharge precautions
- 22 Configuring the drive
- 22 Serial ATA cables and connectors
- 23 Drive mounting
- 23 Mechanical specifications
- 24 Serial ATA (SATA) interface
- 24 Hot-Plug compatibility
- 24 Serial ATA device plug connector pin definitions
- 25 Supported ATA commands
- 27 Identify Device command
- 30 Set Features command
- 31 S.M.A.R.T. commands