advertisement
![INTRODUCTION. Datalogic DS2100N | Manualzz INTRODUCTION. Datalogic DS2100N | Manualzz](http://s3.manualzz.com/store/data/057146494_1-7dff836792498500fbe5af9a72825aa1-360x466.png)
INTRODUCTION
2
2 INTRODUCTION
2.1 PRODUCT DESCRIPTION
The DS2100N laser scanner satisfies the most advanced needs of a wide range of users. It has been developed focusing on the realistic requirements of its target market. The outstanding result is an extremely compact, cost-effective and easy to use industrial scanner.
Standard Application
Program
A standard application program is factory-loaded onto the
DS2100N. This program controls barcode reading, serial port interfacing, data formatting and many other operating and control parameters.
It is completely configurable from a host computer through the
Genius™ utility program provided on CD with the scanner, or via the serial interface (Genius™ based Host Mode Programming).
Custom Application
Programs
If the Standard Application Program does not meet your requirements, please contact your local Datalogic distributor.
Some of the main features of DS2100N are listed below:
ACR-Lite (Advanced Code Reconstruction) small dimensions and light weight software programmable scanning speed on all models linear and raster version completely configurable via serial interface (Genius™)
3 serial communication interfaces (Main, Auxiliary, ID-NET™) supply voltage from 10 to 30 Vdc reads all popular codes
test mode to verify the reading features and exact positioning of the scanner without the need for external tools programmable in 4 different operating modes to suit the most various barcode reading system requirements code verifier
low power consumption
The DS2100N uses a solid-state laser diode as a light source; the light emitted has a wavelength between 630 and 680 nm. Refer to the section “Safety Precautions” at the beginning of this manual for information on laser safety.
The protection class of the enclosure is IP65, the reader is therefore suitable for industrial environments where high protection against harsh external conditions is required.
15
advertisement
Related manuals
advertisement
Table of contents
- 11 RAPID CONFIGURATION
- 11 Step 1 – Connect the System
- 14 Step 2 – Mounting and Positioning the System
- 15 Step 3 – X-PRESS™ Configuration
- 18 Step 4 – Installing Genius™ Configuration Program
- 23 Step 5 – Test Mode
- 24 Advanced Scanner Configuration
- 25 INTRODUCTION
- 25 Product Description
- 26 Indicators
- 26 ID-NET
- 28 How To Setup/Configure the Scanner Network
- 29 X-PRESS™ Human Machine Interface
- 29 Diagnostic Indication
- 30 X-PRESS™ Functions
- 32 Model Description
- 33 Accessories
- 34 INSTALLATION
- 34 Package Contents
- 35 Mechanical Installation
- 36 Mounting DS2100N
- 37 Mounting a GFC-2020 Accessory Lateral Output Deflection Mirror
- 38 Mounting a GFC-2100 Accessory Lateral Output Deflection Mirror
- 39 Mounting a GFC-200 Accessory Contact Reading Mirror
- 42 Mounting an OM2000N Accessory Oscillating Mirror
- 45 Positioning
- 46 CBX ELECTRICAL CONNECTIONS
- 47 Power Supply
- 47 Main Serial Interface
- 48 RS232 Interface
- 49 RS485 Full-Duplex Interface
- 50 RS485 Half-Duplex Interface
- 52 ID-NET™ Interface
- 52 ID-NET™ Cables
- 53 ID-NET™ Response Time
- 57 ID-NET™ Network Termination
- 57 Auxiliary RS232 Interface
- 58 Inputs
- 61 Code Verifier
- 61 Outputs
- 63 User Interface - Host
- 64 25-PIN CABLE ELECTRICAL CONNECTIONS
- 65 Power Supply
- 65 Main Serial Interface
- 66 RS232 Interface
- 67 RS485 Full-Duplex Interface
- 68 RS485 Half-Duplex Interface
- 70 ID-NET™ Interface
- 70 ID-NET™ Cables
- 71 ID-NET™ Response Time
- 75 ID-NET™ Network Termination
- 75 Auxiliary RS232 Interface
- 76 Inputs
- 79 Code Verifier
- 79 Outputs
- 80 User Interface - Host
- 81 TYPICAL LAYOUTS
- 81 Point-to-Point
- 83 Pass-Through
- 85 ID-NET
- 91 RS232 Master/Slave
- 92 Multiplexer Layout
- 93 READING FEATURES
- 93 Advanced Code Reconstruction (ACR-Lite)
- 94 Important ACR-Lite Reading Conditions
- 94 Tilt Angle for Advanced Code Reconstruction
- 96 Advanced Code Reconstruction Reading Conditions
- 97 Linear Code Reading
- 97 Step-Ladder Mode
- 98 Picket-Fence Mode
- 99 Performance
- 99 Raster
- 100 Reading Diagrams
- 106 MAINTENANCE
- 106 Cleaning
- 107 TROUBLESHOOTING
- 107 General Guidelines
- 110 TECHNICAL FEATURES
- 112 GLOSSARY
- 115 INDEX