Chapter 1 Introduction. Mantracourt FSU-SSBD
Add to My manuals28 Pages
Mantracourt FSU-SSBD is a high-precision Strain Gauge Converter that easily connects strain bridge sensors to your PC via USB. It allows you to make high precision measurements and communicate them directly to a PC. The FSU-SSBD is a compact and versatile device that can be used in a wide range of applications, including:
- Testing and measurement: The FSU-SSBD can be used to measure strain, force, pressure, and other physical parameters. It is ideal for use in applications where high accuracy and precision are required.
- Data acquisition: The FSU-SSBD can be used to acquire data from strain gauge sensors and store it on a PC. This data can then be used for analysis, reporting, and other purposes.
advertisement
Chapter 1 Introduction
This chapter provides an introduction to the FSU products, describing the product range and main features.
Overview
The FSU product family comprises of Digital Sensor Cards that connect strain bridge sensors to your PC via USB.
The FSU product is a compact, high-precision Strain Gauge Converter; converting a strain gauge sensor input to a digital output and is connected to a PC via a USB port. They allow high precision measurements to be made and communicated directly to a PC and is aimed at applications which require high-speed measurement.
Simply by plugging the device into a PC, data can be extracted from most strain gauge bridge input sensors and acquired by software which allows data manipulation removing the need for amplifiers, filters & multimeters.
Free-standing module fitted with 9-way ‘D’ type socket for load cell.
Micro USB socket accepts a USB lead with type ’A’ connector at the PC end.
LED Status Indication
The module indicates status via a red Healthy LED.
When the FSU is placed in configuration mode the LED will be on solidly.
When the FSU is in recording mode and transmitting data the LED should flash ON for 100ms every 500ms (LED will be OFF but flash on for a tenth of a second every half a second).
If the integrity of the load cell is in doubt the LED will flash OFF for 100ms every 500ms (LED will be ON but flash off for a tenth of a second every half a second).
Mantracourt Electronics Limited – FSU User Manual 2
advertisement
Related manuals
advertisement
Table of contents
- 3 Chapter 1 Introduction
- 3 Overview
- 3 LED Status Indication
- 4 Chapter 2 Getting Started
- 4 Communications Interface Information
- 4 FSU Toolkit
- 4 What Can The Toolkit Do?
- 4 Installing FSU Toolkit
- 6 Connecting the Module to the Computer
- 6 Using the Found New Hardware Wizard
- 7 Using the Software
- 8 Home Page
- 9 Information Page
- 11 Save and Restore Page
- 12 Lock Page
- 13 Calibration Page
- 14 System Zero
- 14 Auto Calibration
- 15 Table Calibration
- 15 Engineering Units
- 16 Capture Page
- 18 Review Page
- 21 Scope Page
- 22 FFT Page
- 24 Chapter 3 Installation
- 24 Identifying Strain Gauge Connections
- 24 9 way D Connector Pin-outs
- 24 4-wire load cell
- 24 6-wire load cell
- 25 Chapter 4 Specifications
- 25 Technical Specifications
- 26 Dimensions & Mounting
- 26 External Dimensions
- 26 LED Position
- 26 Mounting Holes
- 27 DIN Rail Mounting (Optional Kit)
- 27 Cable Clearance
- 28 Cable Retention
- 28 Environmental Approvals
- 28 CE Approvals
- 28 Warranty