3 Operating Determinations. Omnitronic LMC Series, 3242FX, 1422FX, 2022FX, 2642FX

Operating Determinations

3

OPERATING DETERMINATIONS

Power Supply

• This product is allowed to be operated with an alternating current of 100-240 V, 50/60 Hz and was designed for indoor use only. The occupation of the connection cables is as follows:

Cable

Brown

Blue

Pin

Live

International

L

Neutral N

Yellow/Green Earth

• The earth has to be connected! If the device will be directly connected with the local power supply network, a disconnection switch with a minimum opening of 3 mm at every pole has to be included in the permanent electrical installation. The device must only be connected with an electric installation carried out in compliance with the IEC standards. The electric installation must be equipped with a Residual Current

Device (RCD) with a maximum fault current of 30 mA.

Cleaning and Service

• Disconnect from mains before cleaning! Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.

• There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are only to be carried out by authorized dealers! Should you need any spare parts, please use genuine parts.

Modifications and Guarantee

• Please consider that unauthorized modifications on the speaker system are forbidden due to safety reasons!

• If this device will be operated in any way different to the one described in this manual, the product may suffer damages and the guarantee becomes void.

Furthermore, any other operation may lead to dangers like short-circuit, burns, electric shock, etc.

Installation

• Do not shake the device. Avoid brute force when installing or operating the device. When choosing the installation spot, please make sure that the device is not exposed to extreme heat, moisture or dust. There should not be any cables lying around. You endanger your own and the safety of others!

Taking into Operation

• Operate the device only after having familiarized with its functions. Do not permit operation by persons not qualified for operating the device. Most damages are the result of unprofessional operation!

Ambient Conditions

• The ambient temperature must always be between -

5° C and +45° C. Keep away from direct insulation

(particularly in cars) and heaters. The relative humidity must not exceed 50 % with an ambient temperature of

45° C.

• This device must only be operated in an altitude between -20 and 2000 m over NN.

• Never use the device during thunderstorms. Over voltage could destroy the device. Always disconnect the device during thunderstorms.

• This device must never be operated or stockpiled in surroundings where splash water, rain, moisture or fog may harm the device. Moisture or very high humidity can reduce the insulation and lead to mortal electrical shocks.

• When using smoke machines, make sure that the device is never exposed to the direct smoke jet and is installed in a distance of 0.5 meters between smoke machine and device.

Serial Barcode

• Never remove the serial barcode from the device as this would make the guarantee void.

Transport

• Please use the original packaging if the device is to be transported.

WEEE Directive

If the units are to be put out of operation definitively, take them to a local recycling plant for a disposal which is not harmful to the environment. Do not dispose of as municipal waste. Contact your retailer or local authorities for more information.

28