Edit a Waypoint (Name, Symbol, and Position). Lowrance electronic LCX-104C

Add to My manuals
200 Pages

advertisement

Edit a Waypoint (Name, Symbol, and Position). Lowrance electronic LCX-104C | Manualzz

To delete a waypoint from the map:

1. Use the arrow keys to select the waypoint with the cursor.

2. Press WPT | → to D

ELETE

W

AYPOINT

| ENT | ← to Y

ES

| ENT . To return to the previous page and clear the cursor, press EXIT .

To delete all waypoints at one time: press MENU | MENU | ↓ to S YSTEM

S ETUP

| ENT | ↓ to D ELETE A LL M Y W AYPOINTS

| ENT | ← to Y ES

| ENT . To return to the previous page, press EXIT | EXIT .

Edit a Waypoint

Waypoint Name

To edit waypoint name: 1. Press WPT | ENT | ENT | ENT | ↓ to waypoint name | ENT |

to E DIT W AYPOINT

| ENT | ENT .

2. Press ↑ or ↓ to change the first character, then press → to the next character and repeat until the name is correct. Press ENT then

EXIT | EXIT | EXIT | EXIT to return to the previous page display.

Waypoint Symbol

To edit waypoint symbol: 1. Press WPT | ENT | ENT | ENT | ↓ to waypoint name | ENT | ↓ to E DIT W AYPOINT

| ENT | ↓ to C HOOSE S YMBOL

| ENT .

2. Use arrow keys to select desired symbol and press ENT . To return to the previous page, press EXIT | EXIT | EXIT | EXIT .

Waypoint Position

To edit waypoint position: 1. Press WPT | ENT | ENT | ENT | ↓ to waypoint name | ENT |

to E DIT W AYPOINT

| ENT .

2. Latitude: press → to L ATITUDE

| ENT . Press ↑ or ↓ to change the first character, then press → to the next character and repeat until the latitude is correct. Press EXIT .

3. Longitude: press

to L ONGITUDE

| ENT . Press

or

to change the first character, then press → to the next character and repeat until the longitude is correct. Press EXIT .

4. When latitude and longitude are correct, return to the previous page: press EXIT | EXIT | EXIT | EXIT .

Selecting a Waypoint

To select a waypoint on the map (for navigating to, for editing, etc.,) use the arrow keys and center the cursor over the waypoint. A highlighted halo will appear around the waypoint.

Set a Waypoint by Average Position

This feature sets a waypoint at the current position after taking several position readings and averaging them. This boosts waypoint position

133

advertisement

Related manuals

advertisement

Table of contents