Different play modes: Shuffle and Repeat. Philips MC150/21, MC150/30, MC150/21M

CD Operation

Different play modes: SHUFFLE and REPEAT

You can select and change the various play modes before or during playback. The play modes can also be combined with

PROGRAMME.

SHUFFLE .........

tracks of the entire disc/ programme are played in random order

SHUFFLE

and

REPEAT ALL

…to repeat the entire disc/ programme continuously in random order

REPEAT ALL ...

repeats the entire disc/ programme

REPEAT ............

plays the current track continuously

1

To select your play mode, press the

SHUFFLE

or

REPEAT

button before or during playback until the display shows the desired function.

2

Press

2;

to star t playback if in the STOP position.

➜

If you have selected SHUFFLE, playback starts automatically.

3

To return to normal playback, press the respective

SHUFFLE

or

REPEAT

button until the various SHUFFLE/ REPEAT modes are no longer displayed.

●

You can also press

9

to cancel your play mode.

Programming track numbers

Programme in the STOP position to select and store your disc tracks in the desired sequence. If you like, store any track more than once. Up to

20 tracks can be stored in the memory.

1

Press

PROGRAM

(

PROG

on the remote control) to enter the programming mode.

➜

Prog is shown and

PROG

flashes.

2

Use the

¡1

or

2™

(

¡

or

™

on remote control) to select your desired track number.

3

Press

PROGRAM

(

PROG

on the remote control) to confirm the track number to be stored.

➜

Next program number P-0

X is displayed.

4

Repeat steps

2-3

to select and store all desired tracks.

➜

FULL is displayed if you attempt to programme more than 20 tracks.

5

To start playback of your disc programme, press

2;

.

Note:

– If you wish, you can add further tracks to your current program. Make sure you are in the STOP position, and that you have not exceeded 20 tracks.

Reviewing the programme

In STOP mode, press and hold down

PROGRAM

(

PROG

on the remote control) for a while until the display shows all your stored track numbers in sequence.

Erasing the programme

You can erase the programme by:

● pressing

9

once in the STOP mode;

● pressing

9

twice during playback;

● opening the CD compartment;

➜

PROG

disappears from the display.

13