33. OPERATION MODES -- Location. Sygonix 1582021, 1582020

33. OPERATION MODES -- Location 94

The keypad is programmable for keypad mode to work stand-alone for door control directly or for server mode to work with a split-decoder for high security access control.

LOCATION

94

(1)

→

OPERATION MODES

0 or 1

(2)

→

VALIDATION

#

(3)

(1) LOCATION

Key in Location 94

(2) OPERATION MODES

0 – Keypad Mode (Default)

Keypad Mode sets the keypad for stand-alone operation to provide its available functions. It is compatible with the auxiliary readers/keypads for multi-station expansion.

1 – Server Mode

Server Mode sets the keypad to compatible with both the decoder for split-decoded operation and the auxiliary readers/keypads for multi-station expansion. A split decoded keypad system uses the keypad(s) for human interface outside and the internal decoder for door lock control to prevent sabotage.

(3) VALIDATION

Press # key once. Two-beep confirms the entry

The DK-2800 MK-II keypads are set in “ KEYPAD MODE ” in default. It is necessary to set it to “ SERVER

MODE ” while the keypad is in Split-Decoded operation. Here are the code entries of setting the keypad into

“ SERVER MODE ”

94 1 #

34. CLOSE PROGRAMMING MODE -- * *

Always close programming mode with * * to set system back to normal Operation after programming.

The button is equivalent to the * button in the keypad with bell button.

VALIDATION

* * ------------------------------- System is back to normal operation mode

50