- Home
- Domestic appliances
- Sewing & ironing
- Sewing machines
- Anita
- Garudan GF-1130-448 MH/L34
- User manual
advertisement
▼
Scroll to page 2
of
71
K. AUTOMATIC PRESSER LIFTING MECHANISM
© ANITA www.garudan.cz
MP05300_200120 GF-1130-448 MH/L34 30
© ANITA
Ref. No
11
12
13
14
7
8
9
10
5
6
3
4
1
2
K. AUTOMATIC PRESSER LIFTING MECHANISM
Part No. Part Name
ACQ40*15
AIR CYLINDER
LS8A20
SCREW M8 L=20
21356506
CYLINDER CONNECTING SCREW
NM6080001SE
NUT M8
SD0720331SP
HINGE SCREW D= 7.24 H= 3.3
21356605
LEVER A
21356803
LEVER B
LS5A10
SCREW M5X0.8 L=10
21356704A
SPL4-01
SHAFT
ELBOW
21356308
21356407
SS6151040SP
21356704B
CYLINDER STAY(FRONT)
CYLINDER STAY(REAR)
SCREW 15/64-28 L=10
NUT 5/16-24T
Qty
4
1
1
1
1
2
1
2
1
1
1
1
1
4 www.garudan.cz
MP05300_200120 GF-1130-448 MH/L34 31
advertisement
Related manuals
advertisement
Table of contents
- 5 Basic Information
- 5 A1. Product description and intended use
- 5 A2. Technical specifications
- 6 Safety Instructions
- 6 B1. General instructions
- 6 B2. Installation precautions
- 7 B3. Operational safety instructions
- 7 B4. Working safety instructions
- 8 B5. Disposal instructions
- 9 Machine Setup
- 9 C1. Oil sump installation
- 10 Operating Instructions
- 10 D1. Replacing the needle
- 11 D2. Threading the machine
- 11 D2.1. Threding the bottom thread
- 12 D2.2. Winding the bobbin
- 13 D2.3. Threading the upper thread
- 15 D3. Adjusting the stitch length and reverse stitch
- 15 D4. Thread tension adjustment
- 15 D4.1. Upper thread tension adjustment
- 15 D4.2. Bottom thread tension adjustment
- 16 D5. Presser foot
- 16 D5.2. Foot pressure adjustment
- 17 D6. Hook safety clutch function
- 17 D7. Timing of the hook opener
- 18 D8. Timing of the hook and the needle
- 20 D9. Control buttons
- 20 D10. Turning the LED light on/off
- 21 Machine Maintenance
- 21 E1. Lubricating the machine
- 21 E1.1. Lubricating the front part of the machine head
- 21 E1.2. Lubricating the machine head
- 22 E1.3. Refilling the oil sump
- 23 E2. Adjusting the lubrication
- 23 E2.1. Adjusting the lubrication of the hook
- 23 E2.2. Adjusting the lubrication of the upper oil tank
- 24 Troubleshooting
- 25 Drive Unit Manual
- 25 G1. Safety instructions
- 25 G2. Description and intended use of a drive unit
- 25 G3. Drive unit technical parameters
- 26 G4. Installation
- 26 G4.1. Connector description
- 27 G4.2. Power supply and grounding
- 27 G4.3. Connecting and settings
- 28 G5. Control panel
- 28 G5.1. Control panel display
- 30 G5.2. Operation panel keys description
- 36 A. Frame & Miscellaneous Cover
- 38 B. Take-Up and Upper Shaft Components
- 40 C. Needle Bar Rocking
- 42 D. Pressure Adjusting & Upper Feed Mechanism (1/2)
- 44 D. Pressure Adjusting & Upper Feed Mechanism (2/2)
- 46 E. Feed Mechanism (1/2)
- 48 E. Feed Mechanism (2/2)
- 50 F. Hook Shaft & Upper Feed Mechanism
- 52 G. Thread Cutting Components
- 54 H. Thread Tension Components
- 56 I. Lower Thread Winder Mechanism Component
- 58 J. Lubrication Components (1/2)
- 60 J. Lubrication Components (2/2)
- 62 K. Automatic Presser Lifting Mechanism
- 64 L. Thread Stand Components
- 66 M. Automatic Back-Tack Components
- 68 N. DL-Mechanism Components
- 70 O. Air Mechanism Components