- Home
- Domestic appliances
- Climate control
- Wood stove
- Lennox International Inc.
- LEGACY C260
- Installation and Operation Manual
advertisement
DO’S AND DON’T
DO NOT:
Install or operate this fireplace insert before reading this manual.
DO NOT:
Close the draft beyond the point at which the flames are completely extinguished.
DO NOT:
Open the fireplace insert door without
fully opening
the draft first.
DO NOT:
Burn driftwood or wood that has been in salt water. This includes some mill ends and scrap lumber that has been floated in salt water on the way to the mill. (This will void your warranty).
DO NOT:
Handle the plated faceplate unnecessarily. Use the door handle only.
DO NOT:
Force oversized logs into the firebox as this may dislodge the baffle assembly.
DO NOT:
Close the door tightly during Burn-In period.
DO:
DO:
DO:
DO
:
DO
:
DO
:
DO:
Be sure to clean any fingerprints from optional accessories that have plated surfaces before burning the appliance. Clean the plated surfaces only with household type glass cleaner and a very soft cloth.
Consult local building department if other than recommended clearances are desired.
Read instructions for the baffle boards and baffle blanket occasionally to ensure you have not bumped or moved them out of place when loading wood.
Check the chimney and baffle monthly to make sure they are clean.
Burn seasoned, dry wood only! (RAIN = WET WOOD)
Open the door frequently during Burn-In period to keep gasket from adhering to the curing paint.
Enjoy the warm feeling of your new Country™ Collection stove or insert.
17
advertisement
Related manuals
advertisement
Table of contents
- 2 Using This Manual
- 3 Important Safety Information
- 4 Testing Information
- 4 Draft Requirements
- 4 Selecting the Proper Venting System
- 5 Negative Pressure Warning
- 5 Creosote
- 5 Ash Disposal
- 5 Burn-In Period
- 5 Paint Curing
- 6 Brick Installation
- 7 Required Clearances
- 8 Hearth Protection
- 9 Chimney Requirements
- 9 Installation Procedures - Masonry Chimney
- 10 Positive Flue Connection
- 11 Fireplace Pre-Installation Preparation
- 11 Insert Pre-Installation Preparation
- 11 Chimney Liner Installation
- 11 Installing the Insert
- 11 Post Installation Checks
- 12 Operating Hints
- 12 Starting and Maintaining a Fire
- 13 Blower Operation (optional kit)
- 14 Operating Techniques and Hints
- 14 Getting the Most Out of Your Fireplace insert
- 14 Maximizing Your Fireplace Insert’s Overall Efficiency
- 14 Achieving Clean, Long Burns
- 15 Maintenance
- 15 Clean Glass
- 16 Troubleshooting
- 17 Do’s and Don’t
- 18 Replacement Parts Lists
- 22 Accessories
- 24 Safety / Listing Labels
- 26 Product Reference Information