- Home
- Domestic appliances
- Sewing & ironing
- Electric laundry dryers
- ALLIANCE
- JC170CSH
- User Instructions
Electronic Coin Control. Caple JT50CSL, DT120FG, JT170CSH, JTB75CSL, C851i, ST120FG, JT120FG, JT170FG, JT75CSH, JT50EG
Add to My manuals68 Pages
advertisement
Operating Instructions
1
SELECT
TEMP
2
INSERT
COIN
3
PUSH
START
25 C
HIGH
TEMP
MED
TEMP
START
LOW
TEMP
NO
HEAT
T361I
T361I
Electronic Coin Control
1. Select HIGH TEMP, MED TEMP, LOW TEMP, or NO HEAT by pressing the appropriate temperature pad.
2. Insert the coin(s) in the coin slot.
3. Press START pad to start tumbler.
To stop the tumbler at any time during the cycle,
OPEN DOOR. To restart the tumbler, CLOSE door and press START pad.
Figure 8
WARNING
To reduce the risk of bodily injury, the tumbler stops tumbling when the door is opened. Do not use the tumbler if it does not stop tumbling when the door is opened or starts tumbling without pressing the
START pad. Remove the tumbler from use and call for service.
W078
4. When the cycle is complete, open door and remove the laundry.
M414462 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 17
advertisement
Related manuals
advertisement
Table of contents
- 13 Step 1: Clean Lint Screen/Compartment
- 13 Step 2: Load Laundry
- 13 Step 3: Determine Required Temperature
- 13 Step 4: Determine Control Type
- 14 Manual Timer Tumblers
- 15 Electro-Mechanical Coin Control Tumbler
- 16 NetMaster Coin Control
- 17 NetMaster Card Control
- 18 Electronic OPL Control
- 19 Electronic Coin Control
- 20 Reversing Operation
- 20 Reverse Control Switch
- 22 Signal
- 22 Reversing
- 22 Status Lights
- 23 Automatic Dry and Condition Mode
- 24 Time Dry and No Heat Modes
- 25 Custom
- 25 Custom Cycle Record
- 26 Special Cycle Mode
- 26 Special Time Mode
- 26 Security Lock-Out
- 26 Show Mode
- 27 Temperature Sensor
- 27 Temperature Adjustment
- 27 Temperature Display (°F/°C)
- 27 Cylinder Temperature Display
- 29 Daily
- 30 Monthly
- 31 Every Three Months
- 31 Every Six Months
- 39 Identificación de modelo
- 40 Servicio a clientes
- 40 Diagrama de cableado
- 41 Ubicación de la placa
- 44 Instrucciones importantes de seguridad
- 47 Paso 1: Limpieza del compartimento/pantalla de pelusa
- 47 Paso 2: Cargado de la ropa
- 47 Paso 3: Determinación de la temperatura requerida
- 47 Paso 4: Determinación del tipo de control
- 48 Secadoras de temporizador manual
- 49 Secadora electromecánica de control de monedas
- 50 Control de monedas de NetMaster
- 51 Control de tarjeta NetMaster
- 52 Control electrónico de OPL
- 53 Control electrónico de moneda
- 54 Función de inversión
- 54 Interrupción de control de inversión
- 56 Señal
- 56 Inversión
- 56 Luces de estado
- 57 Modalidad de condición y secado automático
- 58 Modalidades de secado por tiempo y sin calor
- 59 Personalización
- 59 Registro de ciclo de personalización
- 60 Modalidad de ciclo especial
- 60 Modalidad de tiempo especial
- 60 Bloqueo de seguridad
- 60 Modalidad de muestra
- 61 Sensor de temperatura
- 61 Ajuste de temperatura
- 61 Despliegue de temperatura (°F/°C)
- 61 Despliegue de temperatura de cilindro
- 63 Diariamente
- 64 Mensualmente
- 65 Cada tres meses
- 65 Cada seis meses