advertisement
Sound adjustments
You can select a preset sound mode suitable to the music genre (C-EQ: custom equalizer).
1
2
Preset values
Indication (For)
USER (Flat sound)
ROCK
(Rock or disco music)
CLASSIC
(Classical music)
POPS (Light music)
HIP HOP
(Funk or rap music)
JAZZ (Jazz music)
BAS TRE LOUD
(bass) (treble) (loudness)
00 00 OFF
+03 +01 ON
+01 –02 OFF
+04 +01 OFF
+02 00 ON
+02 +03 OFF
Adjusting the sound
You can adjust the sound characteristics to your preference.
1
Indication, [Range]
BAS * 1 (bass), [–06 to +06]
Adjust the bass.
TRE * 1 (treble), [–06 to +06]
Adjust the treble.
FAD * 2 (fader), [R06 to F06]
Adjust the front and rear speaker balance.
BAL (balance), [L06 to R06]
Adjust the left and right speaker balance.
LOUD * 1 (loudness), [LOUD ON or
LOUD OFF]
Boost low and high frequencies to produce a well-balanced sound at low volume level.
SUB.W
* 3 (subwoofer), [00 to 08]
Adjust the subwoofer output level.
VOL (volume), [00 to 30 or 50 * 4 ]
Adjust the volume.
* 1 When you adjust the bass, treble, or loudness, the adjustment you have made is stored for the currently selected sound mode (C-EQ) including “USER.”
* 2 If you are using a two-speaker system, set the fader level to “00.”
* 3 This takes effect only when a subwoofer is connected.
* 4 Depending on the amplifier gain control setting. (See page 18 for details.)
2
Indication pattern changes as you adjust the level.
Ex.: When “TRE” is selected
15
advertisement
Related manuals
advertisement