ASUS DDNS Hizmeti

DSL-N66U, ASUS DDNS hizmetini destekler. Servis merkezinde aygıtları değiştirirken, ASUS DDNS hizmetine kaydolduysanız ve orijinal etki alanı adını tutmak istiyorsanız, veri aktarımı yapılmalıdır. Daha fazla bilgi için yerel servis merkezinizi ziyaret edin.

• Etki alanında bir aktivite yoksa - örneğin yönlendiricinin yeniden yapılandırılması veya kayıtlı etki alanına erişim gibi – sistem 90 gün içinde kayıtlı bilgileri otomatik olarak siler.

• Aygıtınızı kullanırken herhangi bir sorun veya zorlukla karşılaşırsanız servis merkeziyle irtibata geçin.

Sık Sorulan Sorular (SSS'lar)

1. Kayıtlı bilgiler kaybolur veya başkaları tarafından kaydedilir mi?

Kayıtlı bilgileri 90 gün içinde güncellemezseniz, sistem otomatik olarak kayıtlı bilgileri siler ve etki alanı başkaları tarafından kaydedilebilir.

2. Altı ay önce satın aldığım yönlendirici için ASUS DDNS kaydını yapmadım. Hala kayıt yapabilir miyim?

Evet, yönlendiriciniz için hala ASUS DDNS hizmeti kaydı yapabilirsiniz. DDNS hizmeti yönlendiricinize eklendiğinde,

ASUS DDNS hizmetine istediğiniz zaman kaydolabilirsiniz.

Kaydolmadan önce, ana bilgisayara adının kayıtlı olup olmadığını kontrol etmek için

Query (Sorgula)

'yı tıklatın.

Değilse, sistem ana bilgisayar adını otomatik olarak kaydeder.

49

50

3. Önceden bir etki alanı kaydı yaptım ve arkadaşım etki alanı adıma ulaşamadığını bildirinceye kadar sorunsuz

çalışıyordu.

Aşağıdakileri kontrol edin:

1. Internet düzgün çalışıyor.

. DNS sunucusu düzgün çalışıyor.

3. Etki alanını yeni güncellediniz.

Hala etki alanınıza erişmede sorun varsa, servis merkezine başvurun.

4. HTTP ve FTP sunucularıma ayrı ayrı erişmek için iki etki alanı kaydı yapabilir miyim?

Hayır, yapamazsınız. Bir yönlendirici için yalnızca bir etki alanı kaydı yapabilirsiniz. Ağda güvenlik uygulaması için bağlantı noktası eşlemesini kullanın.

5. Yönlendiriciyi yeniden başlattıktan sonra, MS DOS ve yönlendirici yapılandırma sayfasında neden farklı WAN

IP'leri görüyorum?

Bu normaldir. ISP DNS sunucusu ve ASUS DDNS arasındaki zaman aralığı MS DOS ve yönlendirici yapılandırma sayfasında farklı WAN IP'lerine neden olur. Farklı ISP'ler IP güncellemesi için farklı zaman aralığına sahip olabilir.

6. ASUS DDNS hizmeti ücretsiz mi yoksa sadece bir deneme sürümü mü?

ASUS DDNS hizmeti bazı ASUS yönlendiricilerine eklenmiş

ücretsiz bir hizmettir. ASUS yönlendiricinizin ASUS DDNS hizmetini destekleyip desteklemediğini kontrol edin.

Ekler

Uyarılar

ASUS Recycling/Takeback Services

ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components, as well as the packaging materials. Please go to http://csr.asus.

com/english/Takeback.htm for the detailed recycling information in different regions.

REACH

Complying with the REACH (Registration, Evaluation,

Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at

http://csr.asus.com/english/inde�.asp�

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference.

• This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

51

5 against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Prohibition of Co-location

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter

Safety Information

To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with minimum distance 0cm between the radiator and your body. Use on the supplied antenna.

Declaration of Conformity for R&TTE directive 1999/5/EC

Essential requirements – Article 3

Protection requirements for health and safety – Article 3.1a

Testing for electric safety according to EN 60950-1 has been conducted. These are considered relevant and sufficient.

Protection requirements for electromagnetic compatibility

– Article 3.1b

Testing for electromagnetic compatibility according to EN

301 489-1 and EN 301 489-17 has been conducted. These are considered relevant and sufficient.

Effective use of the radio spectrum – Article 3.

Testing for radio test suites according to EN 300 38- has been conducted. These are considered relevant and sufficient.

CE Mark Warning

This is a Class B product, in a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

Canada, Industry Canada (IC) Notices

This Class B digital apparatus complies with Canadian ICES-003

53

54 and RSS-10.

Operation is subject to the following two conditions: (1) this device may not cause interference, and () this device must accept any interference, including interference that may cause undesired operation of the device.

Radio Frequency (RF) E�posure Information

The radiated output power of the ASUS Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The

Dell Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.

This device has been evaluated for and shown compliant with the IC Specific Absorption Rate (“SAR”) limits when installed in specific host products operated in portable exposure conditions

(antennas are less than 0 centimeters of a person’s body).

This device has been certified for use in Canada. Status of the listing in the Industry Canada’s REL (Radio Equipment List) can be found at the following web address: http://www.ic.gc.ca/app/sitt/ reltel/srch/nwRdSrch.do?lang=eng

Additional Canadian information on RF exposure also can be found at the following web: http://www.ic.gc.ca/eic/site/smt-gst.

nsf/eng/sf0879.html

Canada, avis d’Industry Canada (IC)

Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et RSS-10.

Son fonctionnement est soumis aux deux conditions suivantes:

(1) cet appareil ne doit pas causer d’interférence et () cet appareil

doit accepter toute interférence, notamment les interférences qui peuvent a ecter son fonctionnement.

NCC

警語

經型式認證合格之低功率射頻電機，非經許可，公司、商號或

使用者均不得擅自變更頻率、加大功率或變更原設計之特性及

功能。低功率射頻電機之使用不得影響飛航安全及干擾合法通

信；經發現有干擾現象時，應立即停用，並改善至無干擾時方

得繼續使用。前項合法通信，指依電信法規定作業之無線電通

信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電

波輻射性電機設備之干擾。

Yetkili distribütör türkiye

BOGAZICI BIL GISAYAR SAN. VE TIC. A.S.

Tel: +90 1 3311000

Adres: AYAZAGA MAH. KEMERBURGAZ CAD. NO.10

AYAZAGA/ISTANBUL

CIZGI Elektronik San. Tic. Ltd. Sti.

Tel:

Adres:

+90 1 3567070

CEMAL SURURI CD. HALIM MERIC IS MERKEZI

No: 15/C D:5-6 34394 MECIDIYEKOY/ISTANBUL

55

56

GNU General Public License

Licensing information

This product includes copyrighted third-party software licensed under the terms of the GNU General Public License. Please see The

GNU General Public License for the exact terms and conditions of this license. We include a copy of the GPL with every CD shipped with our product. All future firmware updates will also be accompanied with their respective source code. Please visit our web site for updated information. Note that we do not offer direct support for the distribution.

GNU GENERAL PUBLIC LICENSE

Version , June 1991

Copyright (C) 1989, 1991 Free Software Foundation, Inc.

59 Temple Place, Suite 330, Boston, MA 0111-1307 USA

Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.

Preamble

The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General

Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free

Software Foundation’s software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too.

When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use

pieces of it in new free programs; and that you know you can do these things.

To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it.

For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.We protect your rights with two steps:

(1) copyright the software, and () offer you this license which gives you legal permission to copy, distribute and/or modify the software.

Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors’ reputations.

Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone’s free use or not licensed at all.

The precise terms and conditions for copying, distribution and modification follow.

57

58

Terms & conditions for copying, distribution, & modification

0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License.

The “Program”, below, refers to any such program or work, and a “work based on the Program” means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language.

(Hereinafter, translation is included without limitation in the term “modification”.) Each licensee is addressed as “you”.

Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does.

1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the

Program a copy of this License along with the Program.

You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.

. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:

a) You must cause the modified files to carry prominent

notices stating that you changed the files and the date of any change.

b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the

Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.

c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the

Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.)

These requirements apply to the modified work as a whole.

If identifiable sections of that work are not derived from the

Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.

Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program.

In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the

Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.

59

60

3. You may copy and distribute the Program (or a work based on it, under Section ) in object code or executable form under the terms of Sections 1 and above provided that you also do one of the following:

a) Accompany it with the complete corresponding machinereadable source code, which must be distributed under the terms of Sections 1 and above on a medium customarily used for software interchange; or,

b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.)

The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.

If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code.

4. You may not copy, modify, sublicense, or distribute the

Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.

5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License.

Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it.

6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the

Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License.

7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this

License, they do not excuse you from the conditions of this

License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the

61

6 only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program.

If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances.

It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices.

Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/ donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.

This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.

8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.

9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.

Each version is given a distinguishing version number. If the

Program specifies a version number of this License which applies to it and “any later version”, you have the option of

following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free

Software Foundation.

10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission.

For software which is copyrighted by the Free Software

Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.

NO WARRANTY

11 BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE,

THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT

PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE

STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER

PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY

OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,

BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF

THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE

DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY

SERVICING, REPAIR OR CORRECTION.

63

64

1 IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR

AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR

ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE

THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR

DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL

OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE

OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT

LIMITED TO LOSS OF DATA OR DATA BEING RENDERED

INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES

OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER

PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS

BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

Ağ Küresel Yardım Hattı Bilgisi

Region Country

Cyprus

France

Germany

Hungary

Italy

Hotline Number

800-9491

0033-170949400

0049-180501090

0049-180501093

( component support )

0049-10959911 ( Fax )

0036-15054561

199-400089

Europe

Greece 00800-4414044

Austria

Netherlands/

Luxembourg

Belgium

Norway

Sweden

Finland

Denmark

Poland

Spain

Portugal

0043-8040513

0031-59157090

003-7815031

0047-316-68

0046-858769407

00358-969379690

0045-383943

0048-5718040

0034-90889688

00351-707500310

Slovak Republic

Czech Republic

0041-31661

0040-596766888

Switzerland-German 0041-848111010

Switzerland-French 0041-848111014

Switzerland-Italian 0041-84811101

United Kingdom 0044-8448008340

Ireland

Russia and CIS

Ukraine

0035-31890719918

008-800-100-ASUS

0038-044545777

Service Hours

09:00-13:00 ;

14:00-18:00 Mon-Fri

09:00-18:00 Mon-Fri

09:00-18:00 Mon-Fri

10:00-17:00 Mon-Fri

09:00-17:30 Mon-Fri

09:00-13:00 ;

14:00-18:00 Mon-Fri

09:00-13:00 ;

14:00-18:00 Mon-Fri

09:00-18:00 Mon-Fri

09:00-17:00 Mon-Fri

09:00-17:00 Mon-Fri

09:00-18:00 Mon-Fri

09:00-18:00 Mon-Fri

10:00-19:00 Mon-Fri

09:00-18:00 Mon-Fri

08:30-17:30 Mon-Fri

09:00-18:00 Mon-Fri

09:00-18:00 Mon-Fri

08:00-17:00 Mon-Fri

08:00-17:00 Mon-Fri

09:00-18:00 Mon-Fri

09:00-18:00 Mon-Fri

09:00-18:00 Mon-Fri

09:00-17:00 Mon-Fri

09:00-17:00 Mon-Fri

09:00-18:00 Mon-Fri

09:00-18:00 Mon-Fri

65

66

Ağ Küresel Yardım Hattı Bilgisi

Region

Asia-Pacific

Americas

Country

Australia

New Zealand

Japan

Korea

Thailand

Singapore

Malaysia

Philippine

India

India(WL/NW)

Indonesia

Vietnam

Hong Kong

USA

Canada

Mexico

Hotline Numbers

1300-78788

0800-78788

0800-13787

0081-473905630

( Non-Toll Free )

008-15666868

0066-4011717

Service Hours

09:00-18:00 Mon-Fri

09:00-18:00 Mon-Fri

09:00-18:00 Mon-Fri

09:00-17:00 Sat-Sun

09:00-18:00 Mon-Fri

09:00-17:00 Sat-Sun

09:30-17:00 Mon-Fri

09:00-18:00 Mon-Fri

1800-85501

0065-64157917

0065-6703835

1900-555581

11:00-19:00 Mon-Fri

11:00-19:00 Mon-Fri

( Repair Status Only ) 11:00-13:00 Sat

0060-30535077 10:00-19:00 Mon-Fri

1800-18550163

1800-090365

09:00-18:00 Mon-Fri

09:00-18:00 Mon-Sat

09:00-1:00 Mon-Sun

006-19495000

50018 (Local Only)

09:30-17:00 Mon-Fri

9:30 – 1:00 Sat

08:00-1:00

13:30-17:30 Mon-Sat

0085-3584770

1-81-8-787

001-8008367847

10:00-19:00 Mon-Sat

8:30-1:00 EST Mon-Fri

9:00-18:00 EST Sat-Sun

08:00-0:00 CST Mon-Fri

08:00-15:00 CST Sat

Ağ Küresel Yardım Hattı Bilgisi

Region

Middle

East +

Africa

Balkan

Countries

Country

Egypt

Saudi Arabia

UAE

Turkey

South Africa

Israel

Hotline Numbers

800-787349

800-11787

00971-4958941

0090-16543000

0861-7877

Service Hours

09:00-18:00 Sun-Thu

09:00-18:00 Sat-Wed

09:00-18:00 Sun-Thu

09:00-18:00 Mon-Fri

08:00-17:00 Mon-Fri

*6557/0097-3914800 08:00-17:00 Sun-Thu

Romania

Bosnia

Herzegovina

Bulgaria

*9770/0097-35598555 08:30-17:30 Sun-Thu

0040-13301786

00387-33773163

Croatia

Montenegro

00359-70014411

00359-9889170

00385-16401111

0038-060851

00381-11070677 Serbia

Slovenia

Estonia

00368-59045400

00368-59045401

0037-6671796

Latvia 00371-67408838

Lithuania-Kaunas 00370-3739000

Lithuania-Vilnius 00370-5101160

09:00-18:30 Mon-Fri

09:00-17:00 Mon-Fri

09:30-18:30 Mon-Fri

09:30-18:00 Mon-Fri

09:00-17:00 Mon-Fri

09:00-17:00 Mon-Fri

09:00-17:00 Mon-Fri

08:00-16:00 Mon-Fri

09:00-18:00 Mon-Fri

09:00-18:00 Mon-Fri

09:00-18:00 Mon-Fri

09:00-18:00 Mon-Fri

Ayrıntılı bilgi için ASUS destek sitesini ziyaret edin:

http://support.asus.com

67

68

EEE Yonetmeligine Uygundur

Manufacturer: ASUSTeK COMPUTER INC.

Address, City: No. 15, LI-TE RD., PEITOU, TAIPEI, 11, TAIWAN

Country/ Region: TAIWAN

Manufacturer Tel: 886--894-3447

Authorized Distributor: Çizgi Elektronik San. ve Tic. Ltd. Şti.

Address, City : Cemal Sururi Cd. Halim Meriç İş Merkezi

No:15/C D:5-6 34394 Mecidiyeköy - İstanbul

PHONE/FAX : (1) 356 70 70 / (1) 356 70 69

Authorized Distributor: Boğaziçi Bilgisayar Ticaret ve Sanayi AŞ.

Address, City: Ayazağa Mah. Kemerburgaz Cad. No:10 Şişli /

İstanbul

PHONE/FAX : (01) 331 10 00/ (01) 331 10 10

Authorized Distributor: Koyuncu Elektronik Bilgi İşlem Sist.

San. ve Dış Tic. A.Ş.

Address, City: Emek Mah. Ordu cad. No:18, Sarıgazi, Sancaktepe Istanbul

PHONE/FAX : +90 16 58 88 88

İrtibat Bilgileri

ASUSTeK COMPUTER INC. (Asya Pasifik)

Adres

Web sitesi

15 Li-Te Road, Peitou, Taipei, Taiwan 1159 www.asus.com.tw

Teknik Destek

Telefon

Yardım faks

Online yardım

+8868943447

+8868907698 support.asus.com

ASUS COMPUTER INTERNATIONAL (Amerika)

Adres

Telefon

Faks

Web sitesi

Online yardım

800 Corporate Way, Fremont, CA 94539, USA

+15107393777

+15106084555 usa.asus.com

support.asus.com

ASUS COMPUTER GmbH (Almanya ve Avusturya)

Adres

Telefon

Faks

Web sitesi

Online iletişim

Harkort Str. 1-3, D-40880 Ratingen, Germany

+49180501093*

+4910959911 www.asus.de

www.asus.de/sales

Teknik Destek

Telefon (Parça, Ağı) +49180501093*

Telefon (Sistem/Dizüstü

Bilgisayar/Eee/LCD) +49180501090*

Faks

Online yardım

+4910959911 support.asus.com

*

Bir Almanya sabit hattından arama 0.14 Euro/dakika; cep telefonundan arama 0.42

Euro/dakika.

69

70

Üretici:

Yetkili temsilci

Avrupa’da:

ASUSTeK Computer Inc.

Tel: +886--894-3447

Adres: 4F, No. 150, LI-TE RD., PEITOU,

TAIPEI 11, TAIWAN

ASUS Computer GmbH

Adres: HARKORT STR. 1-3, 40880

RATINGEN, GERMANY

EEE Yönetmeliğine Uygundur.

Diğer Önemli Bilgiler

1. Lütfen taşıma esnasında ıslatmayınız, ıslak ve nemli alanlarda bulundurmayınız, ürünü ters çevirmeyiniz ve dikkatlice taşıyınız.

2. Lütfen Masaüstü Bilgisayarınızı nemli bezle silerken elektrik fişini çekiniz ve temizlik için kimyasal deterjan kullanmayınız.

3. Masaüstü Bilgisayarlar periyodik bakım gerektirmez.

4. Kullanıcılar ürünün montaj ve bağlantılarını kendileri yapabilir.

5. Bakanlıkça tespit ve ilan edilen kullanım ömrü 7(yedi) yıldır.

6. ASUS iletişim bilgileri

ASUS Bilgisayar Sistemleri Tic. Ltd. Şti. (Türkiye)

ASUS Teknik Destek Merkezi - İSTANBUL

Telefon: +90 216 524 30 00

Faks: +90 216 481 83 80

E-Posta: [email protected]

Adres: Alemdağ Caddesi. Masaldan İş Merkezi. No: 60 C Blok D1

Kısıklı Çamlıca Üsküdar İstanbul

ASUS Teknik Destek Merkezi - ANKARA

Telefon: +90 312 473 1280

Faks: +90 312 473 1281

E-Posta: [email protected]

Adres: Cevizlidere Mahallesi Cevizlidere Caddesi No:61/A Çankaya

Ankara

7. Üretici ve ithalatçı bilgileri:

URETICI:

ASUSTek COMPUTER INC.

NO. 15, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN

886-2-2894-3447

ITHALATCI:

KOYUNCU ELEKTRONIK BILGI ISLEM SISTEMLERI SANAYI VE DIS TICARET

ANONIM SIRKETI

EMEK MAH. ORDU CAD. NO:18, SARIGAZI, SANCAKTEPE ISTANBUL, 34785,

TURKEY

+90 216 528 8888

71

7