<b>Operation </b>. Miele KM 551, KM 543, KM 553, KM 550, KM 544, KM 545, KM 540, KM 541, KM 547, KM 542
Add to My manuals76 Pages
advertisement
Operation
Sensors
This hob is equipped with electronic sensors which react to finger contact.
To operate a cooking zone, touch the relevant sensor. Each time you touch a sensor, an audible tone sounds.
Take care only to touch the middle of the sensor required. Keep the control panel clean, and do not place anything on top of it. The sensors may fail to react or they could mistake the article or any dirt for a fingertip contact, thereby activating a function or even causing the hob to switch off automatically
(see Safety switch-off.)
Never place hot pans on the sensor switches. The electronic unit underneath could get damaged.
Switching on
The hob must be switched on before any of the zones can be used.
Do not leave the appliance unattended whilst it is being used.
To switch the hob on:
^ Touch the ON/OFF sensor s.
0 appears in each of the cooking zone displays. If no further entry is made, the hob will switch itself off after a few seconds for safety reasons.
To switch a cooking zone on:
^ Select a power setting between 1 and
9 by touching the - or + sensor.
To select cooking with Auto heat-up, press the - sensor first (see "Auto heat-up"). To select cooking without
Auto heat-up, press the + sensor first.
If you wish to switch on another cooking zone, and the
0 for that zone has already gone out, simply press the
- or + briefly. The
0 will reappear and you can select a power setting (with or without Auto heat-up).
25
advertisement
Related manuals
advertisement
Table of contents
- 4 Guide to the appliance
- 6 KM 530 / KM
- 10 KM 543 / KM
- 11 KM 552 / KM
- 12 Cooking zone sensors and displays
- 12 Timer sensors and display
- 13 Cooking zones
- 15 Warning and safety instructions
- 21 Caring for the environment
- 22 Before using for the first time
- 22 Cleaning for the first time
- 22 Heating up for the first time
- 23 Calibrating the sensors
- 24 How the cooking zones work
- 25 Operation
- 25 Sensors
- 25 Switching on
- 26 Settings
- 27 Auto heat-up
- 28 Switching on an extended area
- 29 Switching off and residual heat indicators
- 31 Tips on saving energy
- 32 Safety features
- 32 Safety lock
- 33 Stop and Go
- 34 Safety switch-off
- 35 Overheating protection
- 36 Timer
- 36 Programming steps in brief
- 36 Setting the minute minder
- 37 Switching a cooking zone off automatically
- 38 Switching between timer functions
- 38 Timer default setting
- 39 Cleaning and care
- 41 Programming
- 44 Problem solving guide
- 46 To test the power level
- 48 Optional accessories
- 49 After sales service, data plate
- 50 Installation
- 50 Safety instructions for installation
- 54 Hob with frame or bevelled edge
- 65 Mains connection box
- 66 Sealant
- 66 Tiled worktop
- 67 Flush-fitted hobs
- 71 Electrical connection
- 73 Wiring diagram