Firmware updates. Revolabs 03-ELITEEXEC8-EU, 03-ELITEEXEC4-EU, 01-ELITEEXEC4, 01-ELITEEXEC8, 03-ELITEEXEC8-JP, 03-ELITEEXEC4-TW, 03-ELITEEXEC4-JP, 03-ELITEEXEC8-TW

Firmware updates

Executive Elite Firmware can be upgraded two different ways. An Executive

Elite system registered to the revoCloud can be upgraded to the most recent build from the Cloud Support web page. Select the system on the cloud webpage, and click on “Upgrade to latest build” to immediately upgrade the

system as described on page 67.

Any system, independent on whether it is registered on the cloud server or not, can be updated through the Software Upgrade page of the local Web UI. If the system is registered to the cloud server, the webpage allows checking the Cloud

Server for an upgrade. An unregistered Executive Elite system can be upgraded from the Web UI using an upgrade software bundle accessible from

the computer connected to the Executive Elite system as described on page 62.

Upgrade bundles are available on Revolabs website in the support section.

Firmware upgrades upgrade all linked components on an Executive Elite system.

• The Software Download pages show the progress of the Base then Antenna upgrades, in that order.

• After the upgrade is successful, linked microphones will begin upgrading over RF. If microphones are not linked, they will begin upgrading the next time they are linked.

• Microphones in a charger will still upgrade as long as they are paired to the

Elite unit that is upgraded.

• An upgrade of the Base unit and the antenna takes about ten minutes.

• Depending on the System Audio Setting, Microphones can take up to 6 minutes to upgrade. Audio modes in which back-channel audio is disabled will take longer to update the microphones.

76