advertisement
2. BASIC OPERATIONS
MANUAL OPERATION
The manual operation allows you to PAN or TILT the selected camera and to control its lens.
ALARM
KEY LOCK
NOTES
●
Manual operation is not available in the AUTO
SEQUENCE or AUTO PATROL modes.
●
Only the lever tilting operation is available in the AUTO
PAN mode.
1
4
7
2
5
8
0
3
6
9
POSI-
TION
OPTION
1
OPTION
2
AUTO
PAN
AUTO
PATROL
Lens operation PAN/TILT control lever
Operating the PAN/TILT Control Lever
Up
Upper left
Left
PAN/TILT
Upper right
Right
Low speed
Variable in max. 8 steps
High speed
●
The rotary turret of the camera rotates according to the direction in which the PAN/TILT lever is tilted.
●
The speed of rotation depends on the angle of tilt of the control lever. The greater the tilt, the faster the speed.
The speed at each step value can be changed according to the tilt angle.
Lower left Lower right
Down
Operation method Speed
REF. : “P/T SPEED” on page 29 for how to change the lever sensitivity.
Operating the Lens
SPEED buttons
IRIS control buttons
FOCUS control buttons
ZOOM control buttons
LENS
IRIS
FOCUS
AF
ZOOM
●
IRIS
To adjust the video image brightness, press and hold one of the IRIS control buttons until the desired brightness is obtained.
CLOSE : Closes the lens iris.
OPEN
: Opens the lens iris.
The iris operation continues as long as the button is being pressed.
●
FOCUS
To adjust the focus, press and hold one of the FOCUS control buttons until the desired focus is obtained.
NEAR
: Brings a near object into focus.
FAR
: Brings a far object into focus.
The focus operation continues for as long as the button is being pressed.
●
ZOOM
To adjust the video image size, press and hold one of the
ZOOM control buttons until the desired size is obtained.
WIDE: Zooms out and widens the image.
TELE: Zooms in and narrows the image.
The zoom operation continues for as long as the button is being pressed.
The movement speeds of zoom and focus are variable with
SPEED button.
REF. : “SPEED button” on the page 7.
12
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 3 CONTENTS
- 4 FEATURES
- 4 ACCESSORIES
- 4 PRECAUTIONS FOR PROPER OPERATION
- 5 CONTROLS, CONNECTORS AND INDICATORS
- 10 CAMERA SELECTION
- 11 POSITION SELECTION
- 12 MANUAL OPERATION
- 13 AUTO SEQUENCE OPERATION
- 14 AUTO PAN OPERATION
- 15 AUTO PATROL OPERATION
- 16 KEY LOCK (PREVENTION OF OPERATION MISTAKE)
- 17 ALARM OPERATION
- 18 DATA OUTPUT
- 18 CAMERA SWITCHING OPERATION
- 19 BASIC SYSTEM (A MODE)
- 21 APPLIED SYSTEM (B MODE)
- 23 REAR PANEL CONNECTORS
- 25 FLOW OF MENUS
- 26 MENU OPERATION
- 27 POSITION SETUP SCREEN
- 28 CAMERA SCREEN
- 28 CONTROL UNIT SCREEN
- 29 OPTION SCREEN
- 30 DATA I/O SCREEN
- 32 ALARM SCREEN
- 32 AUTO SEQUENCE SCREEN
- 33 TROUBLESHOOTING
- 34 SPECIFICATIONS