advertisement
Cassette Deck/VCR Features
Playing and Recording
Video Tapes
You can connect four video sources to the receiver. If you connect a VCR to the
VCR/TAPE 1
audio and video jacks, you can copy video tapes from one VCR to another and monitor the dubbing process.
Playing a Video Tape
To play a video tape, load the tape into the VCR connected to either
VCR/TAPE 1
,
LD/SAT,
or
DVD/TV
. Press the button (
VCR/TAPE 1
,
LD/SAT
, or
DVD/TV
) that corresponds to the jack the VCR is connected to.
VCR
,
LD/SAT
, or
DVD
appears on the display. To view the program on a source connected to the front panel
VIDEO
L AUDIO R
jacks, press
VIDEO INPUT
next to the jacks.
VIDEO
appears on the display. Follow the VCR’s instructions to begin playback. If you connected a monitor to the receiver’s
VIDEO OUT
jack, you can view the program on that monitor.
Copying a Video Tape
Follow these steps to copy a video tape from one VCR to another.
1. Load the tape you want to copy into a VCR connected to the
LD/SAT, DVD/
TV
, or front panel
VIDEO L AUDIO R
jacks.
2. Load a blank tape (or one you want to record over) into the VCR connected to the
VCR/TAPE 1
jacks.
3. Press
LD/SAT
,
DVD/TV
, or
VIDEO INPUT
.
4. Begin recording and playback on the VCRs.
Important: Most material performed in public, such as concerts, plays, and movies, or distributed on prerecorded video tapes is copyrighted. The unauthorized recording or duplication of copyrighted material is a violation of the copyright laws of most countries and such duplication may result in fines, imprisonment, or both. Note, however, that in the United States, it is not a violation of U.S. copyright laws for a consumer to record a broadcast television program for private (in-home) viewing.
20
advertisement
Related manuals
advertisement
Table of contents
- 5 Preparing Your Receiver
- 5 Positioning Speakers
- 6 Connecting Speakers
- 9 Connecting Program Sources
- 11 Connecting the Antennas
- 13 Using One Remote Control for More than One Unit
- 13 Installing the Remote Control’s Batteries
- 14 Using the AC Power Outlet
- 14 Connecting to AC Power
- 15 Basic Operation
- 16 Balance Control
- 16 Loudness Control
- 16 Muting the Receiver
- 16 Using Headphones
- 17 Tuning the Radio
- 18 Using FM MONO
- 19 Cassette Deck/VCR Features
- 19 Using the VCR/TAPE 1 and TAPE 2 Monitor Buttons
- 19 Recording an Audio Source
- 19 Dubbing a Cassette Tape
- 20 Playing and Recording Video Tapes
- 21 Using Advanced Sound Options
- 22 Sound Mode Adjustments (Remote Control Only)
- 23 Using the Remote Control
- 25 Resetting the Remote Control
- 25 Training the Remote Control
- 27 Troubleshooting
- 27 Returning Controls to Factory Defaults
- 28 Care and Maintenance
- 29 The FCC Wants You to Know
- 30 Specifications
- 32 Index to Features by Control Name