MP3/WMA Operation (CD). Virtual Reality VR3 VR500CS-BT, Elite VR500CS-BT, VR500CS-BT

cally switch to Radio Mode.

2. Multi-Session CD Reading

This unit can read multi-session CDs.

The multi-session reading will be activated automatically if the player detects a file that is written in multi-session format. Press and hold the Volume Knob until “DSP OFF” is shown on the LCD, then press the Volume

Knob to cycle through the menu selections until “MULT OFF” is shown. Use the Volume Knob to choose “MULT ON” or “MULT

OFF”. The default is MULT OFF.

CD Operation

(Cont)

display. Press this button again to cancel the repeat function.

8. Random

On the Remote or Head Unit, press the

RDM/4 Button to play all the tracks in random order. “RDM ON” will appear on the display. Press this button again to stop random play.

3. Selecting Tracks

On the Remote or Head Unit, press the >>|

Button to advance CD to the next track.

Track numbers will be shown on the display.

Press and hold >>| Button to fast forward.

Press the |<< Button to go to a previous track. Track numbers will be shown on the display. Press and hold the |<< Button to fast reverse. Disc will play normally when the >>| or |<< Button is released.

4. Play/Pause CD

On the Remote or Head Unit, press the

BND•ID3/>|| Button to pause the CD. Press these buttons again to resume playback.

MP3/WMA on CD

1. Insert/Eject CD

Insert a disc with MP3 and/or WMA files into the CD slot with label side up. The disc will be automatically loaded into the unit, even when the unit is off or in Radio Mode. The word “MP3 DISC” will be displayed as the

CD is loaded. The first file in the root folder will be played. As the file is playing, “ROOT” will be displayed first, then if there is any ID3 information available, it will be displayed as the file is playing. Press the EJECT Button to eject the disc from the slot. If the disc is not removed from the slot within 5 seconds, it will automatically be loaded into the slot again. When the disc is ejected and removed, the unit will automatically switch to

Radio Mode.

5. Resume All Tracks

On the Remote or Head Unit, press the

1/TOP Button to play the all the tracks again. The first song on the CD will be played.

6. Scanning Tracks

On the Remote or Head Unit, press the

INT/2 Button to play the first 10 seconds of each track. Press this button again to resume playback.

2. Multi-Session CD Reading

This unit reads multi-session CDs.

The multi-session reading will be activated automatically if the player detects a file that is written in multi-session format. Press and hold the Volume Knob until “DSP OFF” is shown on the LCD, then press the Volume

Knob to cycle through the menu selections until “MULT OFF” is shown. Use the Volume Knob to choose “MULT ON” or “MULT

OFF”. The default is MULT OFF .

7. Repeat

On the Remote or Head Unit, press the

FPS/RPT Button to repeat the same track continuously. “RPT ON” will appear on the

3. Selecting Tracks

Remote or Head Unit, press the >>| Button to advance CD to the next track. Track numbers will be shown on the display. Press and hold >>| to fast forward.

16