Useful features. Sharp LC-19D1E-BK, lc-19d1e, LC-19D1E-WH, LC19D1EBK, LC-19D1E-RD, LC19D1EWH, LC19D1ERD, LC-19D1S

Useful features

WIDE MODE

TV/DTV/AV only

You can select the picture size. Selectable picture size varies with the type of signal received.

Item (for SD (Standard-Definition) signal)

Normal: For 4:3 “standard” pictures. A side bar appears on each side.

Zoom 14:9: For 14:9 letterbox pictures. A thin side bar appears on each side, and you may see bars on the top and bottom with some programmes.

Panorama: In this mode the picture is progressively stretched toward each side of the screen.

Full: For 16:9 squeeze pictures.

Cinema 16:9: For 16:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.

Cinema 14:9: For 14:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.

WIDE MODE

PC only

You can select the picture size.

1

Press f.

• The WIDE MODE menu displays.

2

Press f or a/b to select a desired item on the menu.

NOTE

• Can also be adjustable when the HDMI-PC input (see page 1) is selected.

• Connect the PC before making adjustments. (See page

9.)

• Selectable picture size may vary with input signal type.

Item

Normal: Keeps the original aspect ratio by filling the screen up to the top and bottom.

Full: An image fully fills the screen.

Dot by Dot: Detects the resolution of the signal and displays an image with the same number of pixels on the screen.

Item (for HD (High-Definition) signal)

Full: Display with the Overscan image. Crop all sides of screen.

●

Manual Selection

1

Press f.

• The WIDE MODE menu displays.

• The menu lists the wide mode options selectable for the type of video signal currently received.

2

Press f or a/b while the WIDE MODE menu displays on the screen.

• As you toggle down the options, each is immediately reflected on the screen. No need to press OK.

●

Auto Selection

If you set WSS and 4:3 Mode in the Setup menu on page 15, the optimum WIDE MODE is automatically chosen for every broadcast, VCR or DVD containing the WSS information.

●

WSS menu

To enable Auto Selection, set WSS in the Setup menu to “On”. (See page 15.)

●

4:3 Mode menu

To set the type of the wide screen, select “Normal” or

“Panorama” in the 4:3 Mode menu. (See page 15.)

Using the analogue programme list

You can also select the desired channel from programme list instead of using 0–9 numeric buttons or P ( r

1

Press OK when no other menu screen is displayed. (Except when an external input source is selected.)

2

Press a/b to select the desired channel to tune in, and then press OK.

Freezing the image while watching

Allows you to capture and freeze one frame from a moving image that you are watching.

1

Press Z.

• Captures one frame from a moving image.

2

Press Z again (or press RETURN) to cancel the function.

NOTE

• The still image automatically goes out after 30 minutes.

4:3 Mode set to “Normal” 4:3 Mode set to “Panorama”

NOTE

• If the signal contains no WSS information, Auto Selection will not function even when the WSS option is enabled.

17