Installing and Connecting the Projection TV
Connecting a Satellite Receiver
Disconnect all power sources before making any connections.
1 c onnect the satellite antenna cable to the satellite receiver’s
SATELLITE IN jack.
2 Using AUDIO and S VIDEO cables, connect the satellite receiver’s
AUDIO and S VIDEO OUT jacks to the projection TV’s AUDIO and
$
2
S VIDEO IN jacks.
&
3c onnect a coaxial cable from your cable or antenna to the projection
2
TV’s VHF/UHF jack.
2
Rear of projection TV
VMCdiOS/820S (not supplied)
I
I
YC-15W3OV (not supplied)
installing and Connecting the Projection TV
Connecting a Satellite Receiver with a VCR
Disconnect all power sources before making any connections.
1
Connect the satellite antenna cable to the satellite receiver’s
SATELLITE IN jack.
2
Connect the CATV cable to the VCR’s VHF/UHF IN jack.
TV’s VHF/UHF jack.
4
Using AUDIO and S VIDEO cables, connect the satellite receiver’s
AUDIO and S VIDEO OUT jacks to the VCR’s AUDIO and S VIDEO
IN jacks.
5 Using AUDIO and S VIDEO cables, connect the VCR’s AUDIO and
S VIDEO OUT jacks to the TV’s AUDIO and S VIDEO IN jacks.
Rear of projection TV
Satellite receiver
YC-15v/3ov
(not supplied)
VMC-81 OS/
820s (not supplied)
AUD
VID
VMC-81 OS/82OS
(not supplied)
24