advertisement
En
CD OPERATIONS
a SET
FUNCTION
JOG MODE
VOLUME/
MULTI JOG
RANDOM/
REPEAT s CLEAR
DISPLAY c PRESET f , g
DISPLAY
SHIFT f , g c PRESET a SET s CLEAR
PROGRAM
0-9,+10
CD
VOLUME
( N , M )
This unit plays back finalized CD-R/RW discs as well as audio
CDs.
Playback
1
Press FUNCTION repeatedly (CD on the remote control) to select the CD function.
2
Insert a disc with the label facing to the right and gently push it until it is loaded automatically inside the unit.
Do not push the disc forcibly.
Note
If you insert a disc with the label side facing to the left,
"CD Error" will be displayed. The disc will eject automatically.
Insert it again correctly.
3
Press c to start play.
To stop playback
Press s.
To pause playback
Press a. Press again to resume playback.
To skip to the beginning of the current/preceding/ succeeding track
Press f or g repeatedly.
To search (playback in fast forward or reverse)
Hold down f or g. Release at the desired point.
To select a track with the remote control (Direct play)
Press the numbered buttons to select a track.
- To select track 25, press +10, +10 and 5.
- To select track 10, press +10 and 0.
To change the display in the playback mode
Press DISPLAY (hold down SHIFT and press DISPLAY on the remote control) during playback.
The display changes in the following order:
1 Level indicator
2 Track number being played and elapsed playing time
3 Track number being played and remaining time of play
•Remaining playback time cannot be displayed during random playback or programmed playback.
10
Random/Repeat playback
Random playback plays all the tracks in random order. Repeat playback plays all the tracks or the track being played repeatedly.
You can select random and repeat all playback at the same time.
On the main unit
1
Press JOG MODE repeatedly so that "RANDOM" or "REPEAT" is displayed.
2
Turn VOLUME/MULTI JOG to select one of the following modes:
Repeat 1 playback: "" 1"
Repeat all playback: """
Random playback: "RANDOM"
3
Press c to start play.
On the remote control
1
Hold down SHIFT and press RANDOM/REPEAT repeatedly to select one of the following modes:
Repeat 1 playback: "" 1"
Repeat all playback: """
Random playback: "RANDOM"
Random/Repeat all playback: "RANDOM ""
2
Press c to start play.
To cancel random/repeat playback
On the main unit
1 Press JOG MODE repeatedly so that "RANDOM" or
"REPEAT" is displayed.
2 Turn VOLUME/MULTI JOG until "RANDOM", "" 1" or
""" disappears.
On the remote control
Hold down SHIFT and press RANDOM/REPEAT repeatedly until "RANDOM", "" 1" or """ disappears.
Direct selection of the tracks with the numbered buttons cancels the random mode.
To repeat a selected set of tracks
First select the tracks with programmed playback.
Then selects repeat playback. (See "Programmed playback" on this page.)
•If the random play mode is activated during "" 1" play mode, the "" 1" will be canceled and """ will be selected.
•Direct selection of the tracks with the numbered buttons cancels the random play mode.
Programmed playback
Plays back up to 30 selected tracks in programmed order.
1
Hold down SHIFT and press PROGRAM on the remote control in stop mode.
"PRGM" flashes on the display.
2
Press the numbered buttons on the remote control to program a track.
-To select the 25th track, press +10, +10 and 5.
-To select the 10th track, press +10 and 0.
The selected track number lights up on the display.
3
Repeat step 2 to program other tracks.
The total number of selected tracks and total playing time will be displayed.
4
Press c to start play.
The track number for the current track flashes on the display.
•During programmed playback, you cannot select a track with the numbered buttons. "Can’t USE" is displayed when you try to select a track .
•It is impossible to play a selected set of tracks in random order. If attempted, "Can’t USE" will be displayed.
•If the total playback time of the program exceeds 99 minutes and 59 seconds, or if a track with a track number exceeding
30 is programmed, the playing time is displayed as
"- -:- -".
•You cannot program more than 30 tracks. "PRGM FULL" is displayed.
To check the program
Press f or g repeatedly in stop mode. The track number and program number are displayed in succession.
To clear the program
Press s in stop mode. "PRGM" disappears on the display.
To add tracks to the program
Repeat step 2 before starting playback. The tracks are added to the end of the program.
To change the programmed tracks
Clear the program and repeat all the steps again.
Notes on CDs
•Do not insert more than one disc.
•Do not tilt the unit with a disc inserted.
•The unit may not play CD-R/RW discs recorded on personal computers or certain kinds of CD-R/RW recorders.
•Do not attach adhesive label to either side of CD-R/RW discs, as doing so may cause malfunction.
•Do not insert an unrecorded CD-R/RW disc. The disc may be damaged.
•Do not use irregular-shaped CDs.
En
11
advertisement
Related manuals
advertisement